XC2000L

The XC2000L family of FPGAs is optimized for operation from a 3.3 V(norminal) supply.Aside from electrical and timing parameters listed in this data sheet, the XC2000L family is all respects indentical with the XC2000 family.The operating power consumption of Xilinx FPGAs is almost exclusively dynamic; it changes with the square of the supply voltage.For a given complexity and clock speed, the XC2000L consumes, therefore, only 44% of the power used by the equivalent XC2000 device.COnsistent with its use in battery-powered equipment, the XC2000L family was designed for the lowest possible power-down and quiescent current consumption.

Features of of the XC2000L are:(1)part of ZERO+ family of 3.3 V FPGAs; (2)low-power, low-supply-voltage FPGA family with two device types; (3)advanced, low power 0.8 uCMOS static-memory technology; (4)identical to the basic XC2000 in structure, pin out, design methodology, and software tools-100% compatible with XC2000 bistreams; (5)guaranteed over the 3.0 V to 3.6 V Vcc range; (6)TTL-equivalent input and output levels; (7)4 mA output sink and source current; (8)advanced packaging using thin and very thin quad flat packs.

The absolute maximum ratings of the XC2000L can be summarized as:(1): supply voltage relative to GND(Vcc) is -0.5 V to +7.0 V; (2): input voltage with repect to GND(VIN) is -0.5 V to Vcc+0.5 V; (3): voltage applied to 3-state output(VTS) is -0.5 V to Vcc+0.5 V; (4): storage temperature(ambient)(Tstg) is -65 to +150; (5): maximum soldering temperature(Tsol) is 260(10s at 1/16 pin); (6): junction temperature plastic(Tj) is 260.