Features: • 16-bit ADC• 12MSPS conversion rate• Low power 320mW typical• 5V single supply or 5V/3.3V dual supply operation• Single or 3 channel operation• Correlated double sampling• Programmable gain (8-bit resolution)• Programmable offset adjust (...
WM8196: Features: • 16-bit ADC• 12MSPS conversion rate• Low power 320mW typical• 5V single supply or 5V/3.3V dual supply operation• Single or 3 channel operation• Correl...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
CONDITION | MIN | MAX |
Digital supply voltage: DVDD | GND - 0.3V | GND + 7V |
Analogue supply voltage: AVDD | GND - 0.3V | GND + 7V |
Digital ground: DGND. Analogue ground: AGND1, AGND2 | GND - 0.3V | GND + 0.3V |
Digital inputs: MCLK, VSMP, CLAMP | GND - 0.3V | GND + 0.3V |
Digital outputs: DOUT | GND - 0.3V | DVDD2 + 0.3V |
Analogue inputs: VINM, VINP, VREFIN | GND - 0.3V | AVDD + 0.3V |
Reference pins: VRT, VRB | GND - 0.3V | AVDD + 0.3V |
Operating temperature range: TA | 0°C | +70°C |
Storage temperature prior to soldering | 30°C max / 85% RH max | |
Storage temperature | -65°C | +150°C |
The WM8196 is a 16-bit analogue front end/digitiser ICwhich processes and digitises the analogue output signalsfrom CCD sensors or Contact Image Sensors (CIS) at pixelsample rates of up to 12MSPS.
The WM8196 includes three analogue signal processingchannels each of which contains Reset Level Clamping,Correlated Double Sampling and Programmable Gain andOffset adjust functions. Three multiplexers allow singlechannel processing. The output from each of thesechannels is time multiplexed into a single high-speed 16-bitAnalogue to Digital Converter. The digital output data isavailable in 8 or 4-bit wide multiplexed format.
An internal 4-bit DAC of the WM8196 is supplied for internal reference levelgeneration. This may be used during CDS to reference CISsignals or during Reset Level Clamping to clamp CCDsignals. An external reference level may also be supplied.ADC references are generated internally, ensuring optimumperformance from the device.
Using an analogue supply voltage of 5V and a digitalinterface supply of either 5V or 3.3V, the WM8196 typicallyonly consumes 300mW when operating from a single5V supply.