Features: • Low Voltage Range-4.5V5.5V Operation• Low active power-275 mW (max.)• Low standby power-28 W (max.)• Easy memory expansion with CE and OE features• TTL-compatible inputs and outputs• Automatic power-down when deselected• CMOS for optimum speed/...
WCMS0808C1X: Features: • Low Voltage Range-4.5V5.5V Operation• Low active power-275 mW (max.)• Low standby power-28 W (max.)• Easy memory expansion with CE and OE features• TTL-comp...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • Low voltage range:-2.7V − 3.6V• Low active power and standby power...
(Above which the useful life may be impaired. For user guidelines, not tested.)
Storage Temperature .............. -65 to +150
Ambient Temperature with
Power Applied..............................0 to +70
Supply Voltage to Ground Potential
(Pin 28 to Pin 14).....................-0.5V to +7.0V
DC Voltage Applied to Outputs
in High Z State[1]........... -0.5V to VCC + 0.5V
DC Input Voltage[1]....... -0.5V to VCC + 0.5V
Output Current into Outputs (LOW)... 20 mA
Static Discharge Voltage.................. >2001V
(per MIL-STD-883, Method 3015)
Latch-Up Current............................ >200 mA
The WCMS0808C1X is a high-performance CMOS static RAM organized as 32K words by 8 bits. Easy memory expansion is provided by an active LOW chip enable (CE) and active LOW output enable (OE) and three-state drivers. The WCMS0808C1X has an automatic power-down feature, reducing the power consumption by 99.9% when deselected. The WCMS0808C1X is in the standard 450-mil-wide (300-mil body width) SOIC and packages.
An active LOW write enable signal (WE) controls the writing/ reading operation of the memory. When CE and WE inputs are both LOW, data on the eight data input/output pins (I/O0 through I/O7) is written into the memory location addressed by the address present on the address pins (A0 through A14). Reading the device is accomplished by selecting the WCMS0808C1X and enabling the outputs, CE and OE active LOW, while WE remains inactive or HIGH. Under these conditions, the contents of the location addressed by the information on address pins are present on the eight data input/output pins.
The input/output pins of WCMS0808C1X remain in a high-impedance state unless the chip is selected, outputs are enabled, and write enable (WE) is HIGH.