Features: Sensor Interface• Direct connect to CMOS image sensor:− CMOS Image Sensor:OmniVision, IC-Media , tasc , PixArt and Motorola ....etc.• Supports real-time video resolutions up to 640X480 and still image resolutions up to 2048X2048• High performance Sensor...
W99688CBM3: Features: Sensor Interface• Direct connect to CMOS image sensor:− CMOS Image Sensor:OmniVision, IC-Media , tasc , PixArt and Motorola ....etc.• Supports real-time video ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Sensor Interface
• Direct connect to CMOS image sensor:
− CMOS Image Sensor:OmniVision, IC-Media , tasc , PixArt and Motorola ....etc.
• Supports real-time video resolutions up to 640X480 and still image resolutions up to 2048X2048
• High performance Sensor DSP functions (includes black level compensation, color Interpolation, false color suppression, edge enhancement, color correction, gamma correction, AEC, AWB, contrast stretching, hue and saturation adjusting)
• Supports universal serial interface to program CMOS image sensor.
User Interface
• Built-in 8-bits 8032 compatible uC with internal 6K bytes data RAM and 128K bytes Flash ROM
• Supports In-System-Programming (ISP) function for external flash ROM through USB to the internal program flash-ROM
• uC can directly access the frame buffer through bank switching.
Host Interface
• 8/16 bits parallel Bus (Indirect access)
JPEG CODEC for Image Compression and Decompression
• Fully compliant with ISO/IEC 10918-1 international JPEG standard
• JPEG compression and decompression for still images
• Real-time motion JPEG (MJPEG) compression with advanced bit rate control for live video
• JPEG baseline sequential mode in interleaved scan YCbCr4:2:2 or YCbCr4:2:0 format
• Three programmable quantization tables for image/video quality control and bit-rate control.
• Support Exchangeable Image File format (EXIF).
Display Interface
• Supports OSD function to display the user interface message on LCD screen
• Supports a digital display output to directly interface with TFT-LCD or other display device, like electric view finder
• Supports the C-STN LCD which have the MCU interface and display data memory
Power Management
• Advanced power management including Power-down, Stand-by, and Operating modes. Engines are only active when they are needed
Operation Modes
• Preview ModeFrame rate up to 30 fps
• Single Snapshot Mode
• Burst Snapshot Mode
− Support up to 10 frames burst snapshot at 1/30 sec interval
• Movie Mode (Motion JPEG)
− About 15 seconds recording time with 800K bytes vedio buffer at 160x120 size @ 15 fps
• Playback Mode
• Transfer Mode
• Still Image Size
− 640x480 (VGA)
− 320x240 (QVGA)
− 160x120 (QQVGA)
− Subject to change by request
• Video Clip Size
− 160x120 (QQVGA)
− Subject to change by request
Built-in Two PLL (Phase-Locked Loops) Clock Synthesizers
5V Core, 3.3V I/O, 5 V Input Tolerant
Built-in 2Mbyte frame buffer and 128Kbyte Flash ROM.
Command set: Easy for base band chip( Host ) develop Camera function through Command set protocol.
Package: 10mmx10mm, 100-balls LFBGA package for fully function
PARAMETER |
MIN. |
MAX. |
UNIT |
Ambient temperature |
0 |
70 |
°C |
Storage temperature |
-40 |
125 |
°C |
DC supply voltage (2.5V) |
0 |
3.5 |
V |
DC supply voltage (3.3V) |
0 |
4.6 |
V |
I/O pin voltage with respect to VSS |
-0.3 |
5.25 |
V |
W99688CBM3 is system camera device which built-in 1Mx16bit SDRAM and 128Kbyte Flash ROM. The W99688CBM3 also is a high performance and highly-integrated system camera device that it can preview, capture, compress, store, and display the digital still images or playback a short period of live video.
In addition to transfer image data, the W99688CBM3 allows to download the programs of micro controller through the USB to update the external flash program ROM, which allows for end users with firmware upgrades through the Internet. W99688CBM3 supports CMOS image sensors with high performance DSP functions including missing color interpolation, AE(Auto Exposure), AWB (Auto White Balance), Gamma Correction, edge enhancement, contrast stretching, hue and saturation adjusting etc.
W99688CBM3 has built-in the baseline JPEG codec for image compression and decompression, which corresponds to the ISO/IEC international standard 10918-1, with YCbCr4:2:2 or YCbCr4:2:0 components in interleaved scan. W99688 also supports the Exchangeable Image File format (EXIF) to ensure data compatibility and exchangeability.
W99688CBM3 includes an 8032 compatible CPU core, a 6K-byte SRAM and two 16-bit programmable timers. W99688CBM3 also provides the In-System-Programming (ISP) function to let users to update the firmware for external flash ROM.
W99688CBM3 also supports a digital display output to directly interface with TFT-LCD, CSTN-LCD or other display device.