VT86C926

Features: * Single chip Ethernet controller for PCI bus interface* Software compatible to NE2000+, NE2000* Support 35ns access time SRAM* Integrated 10BaseT TP interface -- Built-in pre-equalization circuitry for transmitter -- smart squelch circuit with programmable threshold for receiver -- Sele...

product image

VT86C926 Picture
SeekIC No. : 004543870 Detail

VT86C926: Features: * Single chip Ethernet controller for PCI bus interface* Software compatible to NE2000+, NE2000* Support 35ns access time SRAM* Integrated 10BaseT TP interface -- Built-in pre-equalization...

floor Price/Ceiling Price

Part Number:
VT86C926
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/5/20

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

* Single chip Ethernet controller for PCI bus interface
* Software compatible to NE2000+, NE2000
* Support 35ns access time SRAM
* Integrated 10BaseT TP interface
  -- Built-in pre-equalization circuitry for transmitter
  -- smart squelch circuit with programmable threshold for receiver
  -- Selective Link integrity test and link disable
  -- Selective polarity detection and correction
  -- Automatic selection between TP and AUI interfaces
* Full IEEE 802.3 AUI interface
  -- Meet 10Base5 and 10Base2 standards
  -- Thin-net or Thick-net enable signal
* Jumper or Jumperless configuration
  -- Jumperl2ess configuration with EEPROM
  -- Jumper configuration with EEPROM storing Ethernet Address
* Direct drive to 4 status LED indicators: transmit, receive, collision, and Thin select
  -- Transmit LED for packet transmitting status and power indicator
  -- Receive LED for packet receiving status and Link status
  -- Collision LED for collision status
  -- Thin select LED for Thin 10Base-2 port select
* ISA NE2000 compatible mode, register compatible to National Semiconductor DP83905 & DP83906
* Optional Full duplex operation with speed up to 20Mbps
* Early receive interrupt allows parallel processing of data during receiving
* Early transmit correction ability allows parallel processing of data during transmission
* Support 16K, 32K Bootrom size
* Support PCI 32-bit data path transfaer with enhance 32-bit driver
* Software controllable power down feature
* Single +5V supply, 0.8um standard CMOS technology
* 100 pin PQFP package



Description

The VT86C926 PCI Ethernet controller is CMOS VLSI designed for easy implementation of CSMA/CD local area networks. Significant features include: twisted-pair interface, PCI Plug&Play compatability and Early Interrupt Receive/Transmit.

The VT86C926 integrates the entire bus interface of PCI systems. Setting hardware jumpers or software configures the VT86C926 bus interface. The VT86C926 also complies with PCI specification v2.0. and is software compatible to either the NE2000. The VT86C926 supports the 10BASE5 or 10BAE2 network interfaces via an external transciever connected to its AUI port. The VT82C926's integrated 10BASE-T transciever supports 10BASE-T and fully complies with IEEE 802.3i specifications.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Hardware, Fasteners, Accessories
Test Equipment
Crystals and Oscillators
LED Products
Audio Products
Circuit Protection
View more