V6301

 Clear microprocessor restart after power up
 Processor reset at power down
 Reset output guaranteed down to V_DD = 1 V
Low power consumption: typ. 3 A at V_DD = 5 V
 - 40 to +85 temperature range
 On request extended temperature range, -40 to +125
 On-chip oscillator
 No external components required
 Push-pull or Open drain output
 TO-92, SOT-23 5L packages
 Pin compatible with DS 1233 A in TO-92

All microprocessor applications where an automatic restart is required:
Computer electronics
White / Brown goods
Automotive electronics
Industrial electronics
Telecom systems
Hand-held systems

The V6301 is a CMOS device which monitors the supply voltage of any electronic system, and generates the appropriate Reset signal. The threshold defines the minimum allowed voltage which guarantees the good unctionality of the system. As long as V_DD stays upside this voltage level, the output stays inactive.If V_DD drops below V_TH, the output gets active. When V_DD rises above V_TH, the output remains active for an additional 290 ms (typ.). This al lows the system to stabilize before getting fully active. The threshold voltage may be obtained in differ ent versions: 2.0 V, 2.4 V, 2.8 V, 3.5 V, 4.0 V, 4.5 V.