TSB14AA1AI

Features:

• Provides a Backplane 1394 Environment That Supports an Asynchronous Transfer Rate of 50 or 100 Mbits/s Across 2 Etches
• Single 3.3-V Supply Operation With 5-V Tolerance on the Transceiver Receive Interface
• Allows Utilization of 3-State Drivers as Well as Open-Collector Drivers
• Software Compatible With the TSB14CO1APM
• Enhanced Compatibility With the 1394 Cable Link Layer. Compatible With 13941995 and 1394a2000 Link Layers; PHY/link Interface is 1394a Compliant†
• Supports Provisions of IEEE 13941995‡§
• Extensive Testability and Debug Functions Added. Expanded Register Set Including Automatic Saving of ID and Priority for Last Node Winning Arbitration
• 100 MHz or 50 MHz Oscillator Provides Transmit, Receive Data, and Link Layer Controller (LLC) Clocks
• Logic Performs System Initialization Arbitration Functions. Encode And Decode Functions Included for Data-Strobe Bit Level Encoding. Incoming Data Resynchronized to Local Clock.
• Operates Over the Extended Temperature Ranges of 0°C to 70°C (no suffix), 40°C to 85°C (I suffix), and 40°C to 105°C (T suffix)
• Packaged in the Very Compact 48-Pin 7 x 7 x 1 mm PFB Package


Pinout




Specifications

Supply voltage range, VDD (see Note 1) . . . . . . . . . . . . . . . . . . .  0.3 V to 4 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . .0.5 V to VDD+0.5 V
Oscillator input voltage (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 V
5V tolerant I/O supply voltage range, VDD_5V . . . . . . . . . . . . . 0.3 V to 5.5 V
5V tolerant input voltage range, VI5V . . . . . . . . . . . 0.5 V to VDD_5V+0.5 V
Output voltage range at any output, VO . . . . . . . . . . . . . .  - 0.5 V to VDD+0.5V
Electrostatic discharge (see Note 2) . . . . . . . . . . . . . . . . . . . . . 2 kV, MM: 200 V
Continuous total power dissipation . . . . . . . . . . . . See Dissipation Rating Table
Operating free air temperature, TA (TSB14AA1A) . . . . . . . . . . . .. . 0°C to 70°C
                                                       (TSB14AA1AI) . . . . . . . .  . . 40°C to 85°C
                                                       (TSB14AA1AT) . . . . . . . . . .40°C to 105°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . 260°C


Description

The TSB14AA1A (TSB14AA1A refers to all three devices: TSB14AA1A, TSB14AA1AI, and TSB14AA1AT) is the second-generation 1394 backplane physical layer device. It is recommended for use in all new designs instead of the first generation TSB14C01A. It provides the physical layer functions needed to implement a single port node in a backplane based 1394 network. The TSB14AA1A provides two pins for transmitting, two for receiving, and two pins to externally control the transceivers for data and strobe. In addition to supporting open-collector drivers, the TSB14AA1AI can also support 3-state† (high-impedance) drivers. The TSB14AA1A is not designed to drive the backplane directly; this function must be provided externally. The TSB14AA1A is designed to interface with a link-layer controller (LLC), such as the TSB12LV01B, TSB12LV32, TSB12LV21B, etc.