Features: ` VCC Operation at 3 V and 4.3 V` 1.8-V Compatible Control-Pin Inputs` IOFF Supports Partial Power-Down Mode Operation` ron = 10 Maximum` ron <0.35 Typical` Cio(ON) = 6 pF Typical` Low Power Consumption (1 A Maximum)` ESD Performance Tested Per JESD 22 6000-V Human-Body Model (A114...
TS3USB31: Features: ` VCC Operation at 3 V and 4.3 V` 1.8-V Compatible Control-Pin Inputs` IOFF Supports Partial Power-Down Mode Operation` ron = 10 Maximum` ron <0.35 Typical` Cio(ON) = 6 pF Typical` Lo...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $.52 - .59 / Piece
Power Switch ICs - USB ESD ProtHi-Spd USB 2.0 1:2 Mux/Demux Sw
MIN | MAX | UNIT | ||
VCC Supply voltage range | 0.5 | 7 | V | |
VIN Control input voltage range(2) (3) | 0.5 | 7 | V | |
VI/O Switch I/O voltage range(2) (3) (4) | HSD+, HSD | 0.5 | VCC + 0.3 | V |
D+, D when VCC > 0 | 0.5 | VCC + 0.3 | V | |
D+, D when VCC= 0 | 5.25 | V | ||
IIK Control input clamp current | VIN < 0 | -50 | mA | |
II/OK I/O port clamp current | VI/O < 0 | -50 | mA | |
II/O ON-state switch current(5) | ±64 | mA | ||
Continuous current through VCC or GND | -65 | ±100 | mA | |
Tstg Storage temperature range | 150 |
The TS3USB31 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (750 MHz) of this switch of the TS3USB31 allows signals to pass with minimum edge and phase distortion. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).