Features: ` Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface Wide Bandwidth of Over 1.65 Gbps (Bandwidth 1.9 Gbps Typ) 165-MHz Speed Operation Serial Data Stream at 10*Pixel Clock Rate Supports All Video Formats up to 1080p and SXGA (1280*1024 at 75 Hz) Total Raw Capacity 4...
TS3DV520E: Features: ` Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface Wide Bandwidth of Over 1.65 Gbps (Bandwidth 1.9 Gbps Typ) 165-MHz Speed Operation Serial Data Stream at 10*Pixel ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.52 - 2.85 / Piece
Multiplexer Switch ICs 12-Channel,1:2 MUX/ DEMUX Switch
Features: ` High-Bandwidth Data Paths Up to 800 MHz` Specified Break-Before-Make Switching ` Cont...
MIN | MAX | UNIT | |||
VCC | Supply voltage range | -0.5 | 4.6 | V | |
VI | Input voltage range(2) | -0.5 | VCC + 0.5 | V | |
VO | Voltage range applied to any output in the high-impedance or power-off state(2) | -0.5 | 7 | V | |
IIK | Input clamp current | VI< 0 | -50 | mA | |
IOK | Output clamp current | VO< 0 | -50 | mA | |
IO | Continuous output current | ±50 | mA | ||
Continuous current through each VCC or GND | ±100 | mA | |||
JA | Package thermal impedance(4) | 31.8 | /W | ||
Tstg | Storage temperature range | -65 | 150 |
The TS3DV520E is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer.
The TS3DV520E provides five differential channels for digital video signal switching. This device provides low and flat ON-state resistance (ron) and excellent ON-state resistance match. Low input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable for various digital video applications, such as DVI and HDMI. This device is specified for partial-power-down applications using Ioff.
The Ioff feature ensures that damaging current of the TS3DV520E will not backflow through the device when it is powered down. The device has isolation during power off. Voltage on the SEL pin should be less or equal to VCC, even in the power-down mode (VCC = 0 V).