Position: Home  > All Categories> Integrated Circuits (ICs) > TS3DV520

TS3DV520

Features: ` Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface Wide Bandwidth of Over 1.65 Gbps (Bandwidth 2.4 Gbps Typ) 165-MHz Speed Operation Serial Data Stream at 10*Pixel Clock Rate Supports All Video Formats up to 1080p and SXGA (1280 *1024 at 75 Hz) Total Raw Capa...

product image

TS3DV520 Picture
See larger image
SeekIC No. : 004528688 Detail

TS3DV520: Features: ` Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface Wide Bandwidth of Over 1.65 Gbps (Bandwidth 2.4 Gbps Typ) 165-MHz Speed Operation Serial Data Stream at 10*Pix...

TS3DV520 Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
TS3DV520
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/1/11

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

` Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface
   Wide Bandwidth of Over 1.65 Gbps (Bandwidth 2.4 Gbps Typ)
   165-MHz Speed Operation
   Serial Data Stream at 10*Pixel Clock Rate
   Supports All Video Formats up to 1080p and SXGA (1280 *1024 at 75 Hz)
   Total Raw Capacity 4.95 Gbps (Single Link)
   HDCP Compatible
` Low Crosstalk (XTALK = 41 dB Typ)
` Low Bit-to-Bit Skew (tsk(o) = 0.1 ns Max)
` Low and Flat ON-State Resistance (ron = 6 Max, ron(flat) = 0.5 Typ)
` Low Input/Output Capacitance (CON = 7.8 pF Typ)
` Rail-to-Rail Switching on Data I/O Ports (0 to 5 V)
` VCC Operating Range From 3 V to 3.6 V
` Ioff Supports Partial-Power-Down Mode Operation
` Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
` ESD Performance Tested Per JESD 22
    2000-V Human-Body Model (A114-B, Class II)
    1000-V Charged-Device Model (C101)


Application

· DVI/HDMI Signal Switching
· Differential DVI, HDMI Signal Multiplexing for
    Audio/Video Receivers and High-Definition
    Televisions (HDTVs)


Specifications

  MIN MAX UNIT
VCC     Supply voltage range 0.5 4.6 V
VIN     Control input voltage range(2) (3) 0.5 7 V
VI/O    Switch I/O voltage range(2) (3) (4) 0.5 7 V
IIK      Control input clamp current VIN < 0   50 mA
II/OK   I/O port clamp current VI/O < 0   50 mA
II/O    ON-state switch current(5)   ±128 mA
          Continuous current through VCC or GND   ±100 mA
JA     Package thermal impedance(6)   31.8 /W
Tstg    Storage temperature range 65 150  

(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground, unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp current ratings are observed.
(4) VI and VO are used to denote specific conditions for VI/O.
(5) II and IO are used to denote specific conditions for II/O.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.




Description

The TS3DV520 is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for digital video signal switching.

This device TS3DV520 provides low and flat ON-state resistance (ron) and excellent ON-state resistance match. Low input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable for various digital video applications, such as DVI and HDMI.

This device TS3DV520 is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Test Equipment
TOP853
TOP2005
Integrated Circuits (ICs)
TA8435H
1MB12-140
Tools
TCP202
G084SN05 V.3
Batteries, Chargers, Holders
ICR18650-28A
ICR18650-26F/h
Inductors, Coils, Chokes
DR127-330-R
SD53-100-R
Circuit Protection
A50QS75-4Y
F-17*77
View more