TMS320C6211,

· Excellent Price/Performance Digital Signal Processors (DSPs): TMS320C62x(TMS320C6211 and TMS320C6211B)
−  Eight 32-Bit Instructions/Cycle
−  C6211, C6211B, C6711, and C6711B are Pin-Compatible
−  150-, 167-MHz Clock Rates
−  6.7-, 6-ns Instruction Cycle Time
−  1200, 1333 MIPS
−  Extended Temperature Device (C6211B)
· VelociTI Advanced Very Long Instruction Word (VLIW) C62x DSP Core (C6211/11B)
−  Eight Highly Independent Functional Units:
−  Six ALUs (32-/40-Bit)
−  Two 16-Bit Multipliers (32-Bit Results)
−  Load-Store Architecture With 32 32-Bit General-Purpose Registers
−  Instruction Packing Reduces Code Size
−  All Instructions Conditional
· Instruction Set Features
−  Byte-Addressable (8-, 16-, 32-Bit Data)
−  8-Bit Overflow Protection
−  Saturation
−  Bit-Field Extract, Set, Clear
−  Bit-Counting
−  Normalization
· L1/L2 Memory Architecture
−  32K-Bit (4K-Byte) L1P Program Cache (Direct Mapped)
−  32K-Bit (4K-Byte) L1D Data Cache (2-Way Set-Associative)
−  512K-Bit (64K-Byte) L2 Unified Mapped RAM/Cache (Flexible Data/Program Allocation)
· Device Configuration
−  Boot Mode: HPI, 8-, 16-, and 32-Bit ROM Boot
−  Endianness: Little Endian, Big Endian
· 32-Bit External Memory Interface (EMIF)
−  Glueless Interface to Asynchronous Memories: SRAM and EPROM
−  Glueless Interface to Synchronous Memories: SDRAM and SBSRAM
−  512M-Byte Total Addressable External Memory Space
· Enhanced Direct-Memory-Access (EDMA)Controller (16 Independent Channels)
· 16-Bit Host-Port Interface (HPI)
−  Access to Entire Memory Map
· Two Multichannel Buffered Serial Ports(McBSPs)
−  Direct Interface to T1/E1, MVIP, SCSA Framers
−  ST-Bus-Switching Compatible
−  Up to 256 Channels Each
−  AC97-Compatible
−  Serial-Peripheral-Interface (SPI)Compatible (Motorola)
· Two 32-Bit General-Purpose Timers
· Flexible Phase-Locked-Loop (PLL) Clock Generator
· IEEE-1149.1 (JTAG†) Boundary-Scan-Compatible
· 256-Pin Ball Grid Array (BGA) Package (GFN Suffix)
· 0.18-µm/5-Level Metal Process
−  CMOS Technology
· 3.3-V I/Os, 1.8-V Internal
      

Supply voltage range, CVDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..− 0.3 V to 2.3 V
Supply voltage range, DVDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 4 V
Input voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 4 V
Output voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 4 V
Operating case temperature ranges, TC: (default) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 to 90 
                                                                (A version) [C6211BGFNA only] . . . . . . . . . −40 to105
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65 to 150

† Stresses beyond those listed under absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and unctional operation of the device at these or any other conditions beyond those indicated under "recommended perating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may  ffect device reliability.
NOTE 1: All voltage values are with respect to V_SS.

The TMS320C62x TMS320C6211, DSPs (including the TMS320C6211/C6211B devices) compose one of the fixed-point DSP families in the TMS320C6000 DSP platform. The TMS320C6211 (C6211) and TMS320C6211B (C6211B) devices are based on the high-performance, advanced VelociTI very-long-instruction-word (VLIW) architecture developed by Texas Instruments (TI), making these DSPs an excellent choice for multichannel and ultifunction applications.

With performance of up to 1333 million instructions per second (MIPS) at a clock rate of 167 MHz, the C6211/C6211B TMS320C6211,device offers cost-effective solutions to high-performance DSP programming challenges. The 6211/C6211B DSP TMS320C6211, possesses the operational flexibility of high-speed controllers and the numerical capability of array processors. This processor has 32 general-purpose registers of 32-bit word length and eight highly ndependent functional units. The eight functional units provide six arithmetic logic units (ALUs) for a high degree of parallelism and two 16-bit multipliers for a 32-bit result. The C6211/C6211B can produce two multiply-accumulates (MACs) per cycle for a total of 333 million MACs per second (MMACS). The C6211/C6211B DSP also has application-specific hardware logic, on-chip memory, and additional on-chip peripherals.

The C6211/C6211B TMS320C6211, uses a two-level cache-based architecture and has a powerful and diverse set of peripherals. The Level 1 program cache (L1P) is a 32-Kbit direct mapped cache and the Level 1 data cache (L1D) is a 32-Kbit 2-way set-associative cache. The Level 2 memory/cache (L2) consists of a 512-Kbit memory space that is shared between program and data space. L2 memory can be configured as mapped memory,cache, or combinations of the two.The peripheral set includes two multichannel buffered serial ports (McBSPs),two general-purpose timers, a host-port interface (HPI), and a glueless external memory interface (EMIF) capable of interfacing to SDRAM, SBSRAM and asynchronous peripherals.

The C6211/C6211B has a complete set of development tools which includes: a new C compiler, an assembly optimizer to simplify programming and scheduling, and a Windows debugger interface for visibility into source code execution.