Features: · 2.5V to 6V Single Supply· Up to 0.73W/CH at 5V, 3 ohms· Up to 85% Power Efficiency· Automatic output power control (APC)· 2.2mA Quiescent Current at 5V· Less Than 0.2uA Shutdown Current· Popless Power-Up, Shutdown and Recovery· Single-Ended output· Thermal Shutoff and Automatic Recover...
TMPA2156D2: Features: · 2.5V to 6V Single Supply· Up to 0.73W/CH at 5V, 3 ohms· Up to 85% Power Efficiency· Automatic output power control (APC)· 2.2mA Quiescent Current at 5V· Less Than 0.2uA Shutdown Current·...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: 4.5V to 5.5V Single SupplyUp to 2.7W at 5V, 3 ohmsUp to 85% Power Efficiency2.2mA Quiesc...
Supply voltage, VDD | In normal mode | -0.3V to 6V | V |
In shutdown mode | -0.3V to 7V | V | |
Input voltage, VI | -0.3V to VDD+0.3 | V | |
Continuous total power dissipation | See package dissipation ratings | ||
Operating free-air temperature, TA | -20 to 85 | ||
Operating junction temperature, TJ | -20 to 1 | ||
Storage temperature, Tstg | -40 to 150 |
The TMPA2156D2 is a STEREO class-D audio power amplifier IC. With SE(Single-Ended) configuration, it delivers up to 0.73W/CH power into a 3 ohms load or 0.6W/CH power into a 4 ohm load or 0.33W/CH power into an 8 ohm load. No external heat-sink is required.
For multiple-input applications, independent gain control and corner frequency can be implemented by summing the input sources through resistor ratio and input capacitor values.
Automatic voltage gain control makes the best use of battery. Analog input signal is converted into digital output which drives directly to the speaker. High power efficiency is achieved due to digital output at the load. The audio information is embedded in PWM(Pulse Width Modulation).