TMP93CU76

TMP93CF76/CF77/CW76/CU76/CT76 are a high-speed advanced 16-bit microcontroller eveloped for application with VCR system control, software servo motor control, VFT driver and imer control. n addition to basics such as I/O ports, the TMP93CF76/CF77/CW76/CU76/CT76 have highspeed/ igh-precision signal measuring circuit, PWM (Pulse-Width-Modulator) and high-precision eal timing pulse generator.
The device characteristics are as follows:
(1) Original 16-bit CPU (900/L CPU)
􀁸􀀃 `TLCS-90 instruction mnemonic upward compatible
􀁸􀀃 `16 Mbyte linear address space
􀁸􀀃 `General-purpose registers and register bank system
􀁸􀀃 `16-bit multiplication/division and bit transfer/arithmetic instructions
􀁸􀀃 `High-speed micro DMA: 4 channels (2 􀁐s/2 byte at 16 MHz)
(2) Minimum instruction execution time: 250 ns at 16 MHz
(3) Internal ROM:

 (5) 20-bit time-base-counter (TBC)
􀁸􀀃 `Free running counter
􀁸􀀃 `Accuracy: 125 ns (at fc 􀀠 16 MHz)
􀁸􀀃 `Overflow: 131 ms (at fc 􀀠 16 MHz)
(6) 8-bit timer (TC0): 1 channel
􀁸􀀃 `For CTL linear time counter
(7) 16-bit timer (TC1 to 5): 5 channels
􀁸􀀃 `C.sync count, capstan FG count, general: 3 channels
(8) Timing pulse generator (TPG): 2 channels
􀁸􀀃 `(16-bit timing data 􀀎 6-bit output data) with 8-stages FIFO : 1 channel
􀁸􀀃 `(16-bit timing data 􀀎 4-bit output data) : 1 channel
􀁸􀀃 `Accuracy: 500 ns (at 16 MHz)
(9) Pulse width modulation outputs (PWM)
􀁸􀀃 `14-bit PWM: 3 channels (for controlling capstan, drum and tuner)
􀁸􀀃 `8-bit PWM: 1 channel (for controlling volume )
􀁸􀀃 `Carrier frequency: 31.25 kHz (at 16 MHz)
(10) 24-bit time base counter capture circuit (Capture 0)
􀁸􀀃 `(18-bit timing data 􀀎 6 bit trigger data) with 8-stages FIFO: 1 channel
􀁸􀀃 `Capture input sources: Remote-control-input (RMTIN), V.sync, CTL, Drum-PG, eneral (1 channel)
􀁸􀀃 `Accuracy: 500 ns (at 16 MHz)
(11) 17-bit time base counter capture circuit (Capture 1/2)
􀁸􀀃 `(16-bit timing data 􀀎 1-bit trigger data): 2 channels
􀁸􀀃 `Capture input sources: Drum-FG, Capstan-FG
􀁸􀀃 `Accuracy: 125 ns (at 16 MHz)
(12) VISS/VASS detection circuit (VISS/VASS)
􀁸􀀃 `CTL duty detection
􀁸􀀃 `VASS data 16-bit latch
(13) Composite-sync-signal (C.sync) input
􀁸􀀃 `Vertical-sync-signal (V.sync) separation
􀁸􀀃 `Horizontal-sync-signal (H.sync) separation
(14) Head Amp switch/Color Rotary control (HA/CR)
(15) Pseudo-V/H generator (PV/PH)
(16) 8-bit AD converter (ADC): 10 channels
􀁸􀀃 `Conversion speed: 95 states (11.8 s at 16 MHz)
(17) Serial Channel (SIO): 1channel
(18) Serial bus I/F
􀁸􀀃 `I<sup>2</sup>C bus with 8-stages FIFO: 1 channel/2 ports
(19) Watch dog timer (WDT)
(20) Interrupt controller (INTC)
􀁸􀀃 `CPU: 8 sources 􀁯 SWI instruction and illegal instruction
􀁸􀀃 `Internal: 17 sources
􀁸􀀃 `External: 5 sources
(21) I/O ports
􀁸􀀃 `67 I/O ports (multiplexed functional pins.)
            gh Break Down Voltage PortE, F are Included: 14 I/O ports
􀁸􀀃 `8 input ports (P40/AIN2 to P47/AIN9)
􀁸􀀃 `10 output ports
           0/G0 to PC7/G7, PD0/G8 to PD1/G9: High Break Down Voltage
(22) Standby function: 4 halt modes (RUN, IDLE2, IDLE1, STOP)
(23) System clock function
􀁸􀀃 `Dual clock operation 16 MHz (High-speed: normal)/32 kHz (Low-speed:slow)
               17-bit Real Time Counter built in
(24) Operating Voltage
􀁸􀀃 `Vcc 􀀠 2.7 to 5.5 V (at 32 kHz)
􀁸􀀃` Vcc 􀀠 4.5 to 5.5 V (at 16 MHz)
(25) Package
􀁸􀀃 `100 pin QFP 14 mm 􀁵 20 mm (Pin pitch: 0.65 mm)
􀁸􀀃 `Product name: P-QFP100-1420-0.65A

Note: The absolute maximum ratings are rated values which must not be exceeded during operation, ven for an instant. Any one of the ratings must not be exceeded. If any absolute maximum ating is exceeded, a device may break down or its performance may be degraded, causing it to atch fire or explode resulting in injury to the user. Thus, when designing products which nclude this device, ensure that no absolute maximum rating value will ever be exceeded.