Position: Home  > All Categories> Integrated Circuits (ICs) > TMP92CA25FG

TMP92CA25FG

Features: (1) CPU: 32-bit CPU (900/H1 CPU)• Compatible with TLCS-900/L1 instruction code• 16 Mbytes of linear address space• General-purpose register and register banks• Micro DMA: 8 channels (250 ns/4 bytes at fSYS = 20 MHz, best case)(2) Minimum instruction execution time...

product image

TMP92CA25FG Picture
See larger image
SeekIC No. : 004524698 Detail

TMP92CA25FG: Features: (1) CPU: 32-bit CPU (900/H1 CPU)• Compatible with TLCS-900/L1 instruction code• 16 Mbytes of linear address space• General-purpose register and register banks• Micr...

TMP92CA25FG Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
TMP92CA25FG
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/1/11

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

(1) CPU: 32-bit CPU (900/H1 CPU)
• Compatible with TLCS-900/L1 instruction code
• 16 Mbytes of linear address space
• General-purpose register and register banks
• Micro DMA: 8 channels (250 ns/4 bytes at fSYS = 20 MHz, best case)
(2) Minimum instruction execution time: 50 ns (at fSYS = 20 MHz)
(3) Internal memory
• Internal RAM: 10 Kbytes (can be used for program, data and display memory)
• Internal ROM: 0 Kbytes (used as boot program)
(4) External memory expansion
• Expandable up to 512 Mbytes (shared program/data area)
• Can simultaneously support 8,- 16- or 32-bit width external data bus
... dynamic data bus sizing
(5) Memory controller
• Chip select output: 4 channels
(6) 8-bit timers: 4 channels
(7) 16-bit timer/event counter: 1 channel
(8) General-purpose serial interface: 1 channels
• UART/synchronous mode
• IrDA ver.1.0 (115 kbps) mode selectable
(9) Serial bus interface: 1 channel: 1 channel
• I2C bus mode only
(10) I2S (Inter-IC sound) interface: 1 channel
• I2S bus mode/SIO mode selectable (Master, transmission only)
• 32-byte FIFO buffer
(11) LCD controller
• Supports monochrome for STN
• Built-in RAM LCD driver
(12) SPI controller
• Supported only SPI mode for SD card
(13) SDRAM controller: 1 channel
• Supports 16 M, 64 M, 128 M, 256 M, and up to 512-Mbit SDR (Single Data Rate)-SDRAM
• Supported not only operate as RAM and Data for LCD display but also programming
directly from SDRAM
(14) Timer for real-time clock (RTC)
• Based on TC8521A
(15) Key-on wakeup (Interrupt key input)
(16) 10-bit AD converter (Built-in Sample Hold circuit): 4 channels
(17) Touch screen interface
• Available to reduce external components
(18) Watchdog timer
(19) Melody/alarm generator
• Melody: Output of clock 4 to 5461 Hz
(20) MMU
• Expandable up to 512 Mbytes (3 local area/8 bank method)
• Independent bank for each program, read data, write data and LCD display data
(21) Interrupts: 49 interrupt
• 9 CPU interrupts: Software interrupt instruction and illegal instruction
• 34 internal interrupts: Seven selectable priority levels
• 7 external interrupts: Seven selectable priority levels (6-edge selectable)
(21) Input/output ports: 84 pins (Except Data bus (16bit), Address bus (24bit) and RD pin)
(22) NAND flash interface: 2 channels
• Direct NAND flash connection capability
• ECC (error detection) calculation (for SLC- type)
(23) Stand-by function
• Three HALT modes: IDLE2 (programmable), IDLE1, STOP
• Each pin status programmable for stand-by mode
(24) Triple-clock controller
• Clock doubler (PLL) supplies 40 system-clock from external 10MHz oscillator to CPU
• Clock gear function: Select high-frequency clock fc to fc/16
• RTC (fs = 32.768 kHz)
(25) Operating voltage:
• VCC = 3.0 V to 3.6 V (fc max = 40 MHz)
• VCC = 2.7 V to 3.6 V (fc max = 27 MHz)
(26) Package:
• 144-pin QFP (P-LQFP144 -1616-0.40C)
• Alarm: Output of 8 kinds of alarm pattern and 5 kinds of interval interrupt
• 144-pin chip form is also available. For details, contact your local Toshiba sales epresentative.




Specifications






Description

The TMP92CA25 is a high-speed advanced 32-bit Microcontroller developed for controlling equipment which processes mass data.

The TMP92CA25 has a high-performance CPU (900/H1 CPU) and various built-in I/Os.

The TMP92CA25FG is housed in a 144-pin flat package. The JTMP92CA25 is a chip form product.
Device characteristics are as follows:






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Crystals and Oscillators
WT325BI0030.000000
2SB49
Line Protection, Backups
BX0023
A20B-1008-0550
Discrete Semiconductor Products
T508N12TOF
MUR20040
Switches
US32DMRJ
HBGQ22P-11ET
Semiconductor Modules
2DI300A-050-03
7MBR25SA-120-50
Static Control, ESD, Clean Room Products
DPA5
PA800-A41
View more