TLP115

Series: -
Number of Channels: 1, Unidirectional
Input Type: DC
Output Type: Open Collector
Mounting Type: Surface Mount
Package / Case: 6-SOIC (0.173", 4.40mm Width) 5 Leads
Current - Output / Channel: 25mA
Data Rate: 10MBd
Current - DC Forward (If): 20mA
Packaging: Tube
Voltage - Isolation: 2500Vrms
Manufacturer: Toshiba
Supplier Device Package: 6-MFSOP, 5 Lead
Propagation Delay High - Low @ If: 60ns @ 0 ~ 16mA


Pinout






Specifications

Characteristic		Symbol	Rating	Unit
LED	Forward current	IF	20	mA
	Pulse forward current (Note 1)	IFP	40	mA
	Peak transient forward current (Note 2)	IFPT	1	A
	Reverse voltage	VR	5	V
Detector	Output current	lO	25	mA
	Output voltage	VO	7	V
	Supply voltage (1 minute maximum)	VCC	7	V
	Peak one cycle surge current	Po	40	mA
Operating temperature range		Topr	-40~85	°C
Storage temperature range		Tstg	-55~125	°C
Lead soldering temperature (10 s)		Tsol	260	°C
Isolation voltage (AC, 1min., RH 60%) (Note 4)		BVS	2500	Vrms

(Note 1) 50% duty cycle, 1ms pulse width.
(Note 2) Pulse width 1s, 300pps.

Description

The TLP115 is designed as a small outline coupler, suitable for surface mount assembly. It consists of a GaAAs light emitting diode, optically coupled to an integrated high gain, high speed shielded photo detector whose output is an open collector schottky clamped transistor. The shield, which shunts capacitively coupled common noise to ground, provides a guaranteed transient immunity specification of 1000V/s.

TLP115 has six features. (1)Input current thresholds: If=10mA (max). (2)Switching speed: 10MBd (typ). (3)Common mode transient immunity: +/-1000V/s (min). (4)Guaranteed performance over temp.: 0 to 70°C. (5)Isolation voltage: 2500Vrms (min). (6)UL recognized: UL1577, file no. E67349. Those are all the main features.

Some absolute maximum ratings of TLP115 have been concluded into several points as follow. (1)Its forward current would be 20mA. (2)Its pulse forward current would be 40mA. (3)Its peak transient forward current would be 1A. (4)Its reverse voltage would be 5V. (5)Its output current would be 25mA. (6)Its output voltage would be 7V. (7)Its supply voltage would be 7V. (8)Its output power dissipation would be 40mW. (9)Its operating temperature range would be from -40°C to 85°C. (10)Its storage temperature range would be from -55°C to 125°C. (11)Its lead solder temperature 10 seconds would be 260°C. (12)Its isolation voltage would be 2500Vrms. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of TLP115 are concluded as follow. (1)Its forward voltage would be typ 1.65V and max 1.8V. (2)Its forward voltage temperature coefficient would be typ -2mV/°C. (3)Its reverse current would be max 10uA. (4)Its capacitance between terminals would be typ 45pF. (5)Its high level output current would be max 250uA. (6)Its low level output voltage would be typ 0.4V and max 0.6V. And so on. If you have any question or suggestion or want to know more information about TLP115 please contact us for details. Thank you!