TLP106

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Note 1: Pulse width PW 10 us, 500 pps.
Note 2: Product considered a two-terminal device: pins 1 and 3 shorted together and pins 4, 5 and 6 shorted together.

The Toshiba TLP106 consists of a GaAℓAs light-emitting diode and an integrated high-gain, high-speed photo-detector. The TLP106 is suitable for isolating input control signals isolation to intelligent power modules.This unit is a 6-pin MFSOP.

The TLP106 has a totem pole output stage to provide source drive and sink drive and features a built-in Schmitt trigger. The detector IC has an internal shield that provides a guaranteed common-mode transient immunity of 10 kV/s.

The TLP106 is of a buffer logic type. An inverter logic version, the TLP102, is also available.
` Buffer logic type (totem pole output)
` Guaranteed performance over temperature : -40~85
` Power supply voltage: -0.5~20 V
` Input current: IFLH = 3 mA (Max.)
` Switching Time (tpLH/tpHL): 400 ns (Max.)
` Common-mode transient immunity : 10 kV/s
` Isolation voltage: 3750 Vrms