Features: SpecificationsDescription The TLE 6208-6 G is a fully protected Hex-Half-Bridge-Driver designed specifically for automotive and industrial motion control applications. Here you can get some information about the features.First,it has six High-Side and six Low-Side-Drivers.Secondly,it is ...
TLE 6208-6 G: Features: SpecificationsDescription The TLE 6208-6 G is a fully protected Hex-Half-Bridge-Driver designed specifically for automotive and industrial motion control applications. Here you can get som...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • Drives motors up to 2 A• Integrated free-wheeling diodes 2.5 A• Shor...
The TLE 6208-6 G is a fully protected Hex-Half-Bridge-Driver designed specifically for automotive and industrial motion control applications. Here you can get some information about the features.First,it has six High-Side and six Low-Side-Drivers.Secondly,it is free configurable as switch, halfbridge or H-bridge.Thirdly,it is optimized for DC motor management applications.Fourthly,it has 0.6 A continuous (1 A peak) current per switch.Fifthly,the outputs are fully short circuit protected with diagnosis.Sixthly,it adopts overtemperature-Protection with hysteresis and diagnosis.Seventhly,it uses Standard SPI-Interface.Eighthly,it has very low current consumption (typ. 10 A, @ 25 ) in stand-by (Inhibit) mode.Ninthly,it has CMOS/TTL compatible inputs with hysteresis.The tenth one is that it has internal clamp diodes.The last one is that it uses enhanced power P-DSO-Package.
What comes next is about the absolute maximum ratings about TLE 6208-6 G.The minimum supply voltage (VS) is -0.3 V and the maximum is 40 V.The minimum supply voltage (VS) is -1 V under the condition that t < 0.5 s and IS > 2 A.The minimum logic supply voltage (VCC) is -0.3 V and the maximum is 5.5 V at 0 V < VS < 40 V.The minimum logic input voltages (DI, CLK, CSN, INH) (VI) is -0.3 V and the maximum is 5.5 V at 0 V < VS < 40 V and 0 V < VCC < 5.5 V.The minimum logic output voltage (DO) (VDO) is -0.3 V and the maximum is VCC V at 0 V < VS < 40 V and 0 V < VCC < 5.5 V.Then is about the output current (cont.),if Bit13 (OCSD) is deactivated (Iout1-6).The minimum is -1.5 A and the maximum is 1.5 A at VDS = 12 V;The minimum is -0.7 A and the maximum is 0.7 A at VDS = 20 V;The minimum is -0.25 A and the maximum is 0.25 A at VDS = 40 V.Next is about the output current (peak),if Bit13 (OCSD) is deactivated at tP < 50 ms; t = 1 s (Iout1-6).The minimum is -2 A and the maximum is 2 A at VDS = 12 V.The minimum is -0.9 A and the maximum is 0.9 A at VDS = 20 V.The minimum is -0.3 A and the maximum is 0.3 A at VDS = 40 V.The junction temperature (Tj) is from -40 to 150.The storage temperature (Tstg) is from -50 to 150.