Features: SpecificationsDescription The TLE 4296 has the following features including Three versions: 3.0 V, 3.3 V, 5.0 V;Output voltage tolerance ±4%;Very low drop voltage;Output current: 30 mA;Inhibit input;Low quiescent current consumption; Wide operation range: up to 45 V;Wide temperature ran...
TLE 4296: Features: SpecificationsDescription The TLE 4296 has the following features including Three versions: 3.0 V, 3.3 V, 5.0 V;Output voltage tolerance ±4%;Very low drop voltage;Output current: 30 mA;In...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: • Drives motors up to 2 A• Integrated free-wheeling diodes 2.5 A• Shor...
The TLE 4296 has the following features including Three versions: 3.0 V, 3.3 V, 5.0 V;Output voltage tolerance ±4%;Very low drop voltage;Output current: 30 mA;Inhibit input;Low quiescent current consumption; Wide operation range: up to 45 V;Wide temperature range: -40 °C Tj 150 °C;Output protected against short circuit;Overtemperature protection;Reverse polarity proof;Very small SMD-Package P-SCT595-5.
The TLE 4296 G is a monolithic integrated low drop voltage regulator in the very small SMD package P-SCT595-5. It is designed to supply e.g. microprocessor systems under the severe conditions of automotive applications. Therefore the device is equipped with additional protection functions against overload, short circuit and reverse polarity. At overtemperature the regulator is automatically turned off by the integrated thermal protection circuit.Input voltages up to 40 V are regulated to VQ,nom = 3.0 V (V30 version) 3.3 V (V33 version) or 5.0 V (V50 version). The TLE 4296 output is able to drive a load of more than 30 mA while it regulates the output voltage within a 4% accuracy. To save energy the device can be switched in stand-by mode via an inhibit input which causes the current consumption to drop below 5 A.
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support TLE 4296 or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.