TLE6288R

On Time (Max) :
Off Time (Max) :
Operating Supply Voltage :
Mounting Style : SMD/SMT
Maximum Operating Temperature : + 150 C
On Resistance (Max) : 0.15 Ohms
Number of Outputs : 6
Supply Current (Max) : 10 mA
Package / Case : DSO-36


Features:

• 3 Channel high side with adjustable P&H current control
• 3 Channel high / low side configurable
• Protection
   Over Current (current limitation)
   Overtemperature
   Overvoltage (active clamping)
• Diagnosis
   Over Current
   Over Temperature
   Open Load (Off-State)
   Short to Ground (Off-state, lowside configuration)
   Short to Vbb (Off-state, highside configuration)
• Interface and Control
   16 Bit Serial Peripheral Interface (2bit/CH)
   Device programming via SPI
   Separate diagnosis output for each CH ( DIAG1 6)
   General Fault Flag + Overtemperature Flag
   Direct parallel control of all channels
   General enable signal to control all channels simultaneously
• Low Quiescent Current
• Compatible with 3.3V and 5V Microcontrollers
• Electostatic discharge (ESD) protection of all pins


Application

• Solenoids, Relays and Resistive Loads
• Fast protected Highside Switching (PWM up to >10kHz)
• Peak and Hold Loads (valves, coils)


Pinout




Specifications

No.	Parameter	Symbol	Value	Unit	Pin / Comment
1	Power Supply Voltage 1 static dynamic : 1min. 0 dynamic : Test cond. Fig.1	VB VB VB	-0.3 .20 24 37	V	DOUT1-3 DOUT1-3 DOUT1-3
2	Power Supply Voltage 2	VCC, VDO	- 0.3 ... 7	V	VCC, VDO
3a	Continuous Drain Source Voltage (lowside configuration)	VDSL	40	V	DOUT SOUT (channel 4-6)
3b	Continuous Source Voltage (Highside configuration)	VSH	-9 ... VB	V	SOUT - GND (channel 4-6)
4	Input Voltage	VIN	-0.3 . VCC+ 0.3	V	IN1-6, Reset, FSIN, CS, SCK, SI, CLKProg
5a	Output Voltage	VOUT	-0.3 . VCC+ 0.3	V	Fault
5b	Output Voltage	VOUT	-0.3 . VCC+ 0.3	V	DIAG1-6, SO
5c	Output Voltage	VCP OUT	VB +10	V	VCP ; no voltage must be applied
6	Operating Temperature	Ta Tj	-40 . +105 -40 . +150
7	Storage Temperature	Tstg	-55 . +150
8	Power Dissipation (Rthja= 20K/W) (Rthja= 30K/W)	Pdmax	2,25 1,5	W
9	Reverse Current (1ms)	Irev	-4	A	between DOUT and- SOUT; Channel 4 to 6
10	ESD (Human Body Model) C= 100pF, R=1.5k Applied to all terminals 3 times	VESDb	2000	V
11	ESD (Machine Model) C= 200pF, R=0 Applied to all terminals 3 times	VESDm	250	V
12	Single Switch off load Inductance		see Fig.2		DOUT, SOUT

Description

The TLE6288R is a 6-channel (150m) Smart Multichannel Switch in SPT4 Technology. The IC has embedded protection, diagnosis and configurable functions. Channel 1-3 are highside channels with integrated charge pump and can be programmed individually to do autonomous peak and hold current regulation with PWM. Channel 4-6 (also with integrated charge pump) can be configured to work as highside Switch or lowside Switch. This IC can be used to drive standard automotive loads in highside or lowside applications with switching frequencies up to 10kHz. In addition the TLE6288R can be used to drive autonomously up to 3 inductive Peak&Hold (valves, coils) loads with programmable peak and hold current values.

Parameters:

Technical/Catalog Information	TLE6288R
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Number of Drivers/Receivers	-
Type	High Side/Low Side Driver
Voltage - Supply	4.5 V ~ 5.5 V
Package / Case	DSO-36
Packaging	Tape & Reel (TR)
Protocol	-
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	TLE6288R TLE6288R