TLE6252G

Features: • Data transmission rate up to 125 kBaud• Very low current consumption in stand-by and sleep mode• Optimized EMI behavior due to limited and symmetric dynamic slopes of CANL and CANH signals• Switches to single-wire mode during bus line failure events• Suppo...

product image

TLE6252G Picture
SeekIC No. : 004521048 Detail

TLE6252G: Features: • Data transmission rate up to 125 kBaud• Very low current consumption in stand-by and sleep mode• Optimized EMI behavior due to limited and symmetric dynamic slopes of C...

floor Price/Ceiling Price

Part Number:
TLE6252G
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2025/1/11

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

• Data transmission rate up to 125 kBaud
• Very low current consumption in stand-by and
  sleep mode
• Optimized EMI behavior due to limited and
  symmetric dynamic slopes of CANL and
  CANH signals
• Switches to single-wire mode during bus line
   failure events
• Supports one-wire transmission mode with ground offset voltages up to 1.5 V
• Preventation from bus occupation in case of CAN controller failure
• Fully-integrated receiver filters
• Short-circuit detection to battery and ground in 12 V powered systems
• Thermal protection
• Bus line error protection against transients in automotive environment



Pinout

  Connection Diagram


Specifications

Parameter Symbol Limit Values Unit Notes
min. max.
Input voltage at VBAT VBAT 0.3 40 V -
Logic supply voltage VCC VCC 0.3 6 V -
Input voltage at TxD, RxD, NERR,
NSTD and ENT
VIN 0.3 VCC + 0.3 V -
Input voltage at CANH and CANL VBUS 10 27 V -
Input voltage at CANH and CANL VBUS 40 40 V 1)
Transient voltage at CANH and CANL VBUS 150 100 V 2)
Input voltage at WAKE VIN - VBAT + 0.3 V -
Input current at WAKE IIN -15 mA 3)
Input voltage at INH, RTH and RTL VIN 0.3 VBAT + 0.3 V -
Termination resistances at RTL and
RTH
RRTL/H 500 16000 -
Junction temperature Tj 40 150 °C -
Storage temperature Tstg 55 155 °C -
Electrostatic discharge voltage
at any pin
Vesd 4000 4000 V 4)

1) VCC = 0 to 5.5 V; VBAT > 0 V; t < 0.1 ms; load dump
2) See ISO 7637
3) Negative currents flowing out of the IC.
4) Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k resistor.
Note: Maximum ratings are absolute ratings; exceeding one of these values may cause
          irreversible damage to the integrated circuit.




Description

The CAN Transceiver TLE6252G works as the interface between the CAN protocol controller and the physical differential CAN bus. Figure 1 shows the principle configuration of a CAN network.

The TLE6252G is optimized for low-speed data transmission (up to 125 kBaud) in automotive and industrial applications.

In normal operation mode a differential signal TLE6252G is transmitted/received. When bus wiring failures are detected the device automatically switches in single-wire mode to maintain communication.

While no data TLE6252G is transferred, the power consumption can be minimized by multiple low power modes.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Resistors
Crystals and Oscillators
Motors, Solenoids, Driver Boards/Modules
Sensors, Transducers
Optical Inspection Equipment
View more