TLE6236G

On Time (Max) :
Off Time (Max) :
Operating Supply Voltage :
Mounting Style : SMD/SMT
Maximum Operating Temperature : + 150 C
Supply Current (Max) : 1.5 mA
Number of Outputs : 8
On Resistance (Max) : 1.7 Ohms
Package / Case : PDSO-28-1


Features:

• Short Circuit Protection
• Overtemperature Protection
• Overvoltage Protection
• 8 bit Serial Data Input and Diagnostic Output (acc. SPI protocol)
• Direct Parallel Control of Four Channels for PWM Applications
• General Fault Flag
• Daisy chainable with other SPI devices
• Very Low Leakage Current ( 1A)
• Compatible with 3V Micro Controllers
• Electostatic Discharge (ESD) Protection


Application

• C Compatible Power Switch for 12V and 24VApplications
• Switch for Automotive and Industrial System
• Solenoids, Relays, Resistive Loads, LEDs
• Robotic Controls


Pinout




Specifications

Parameter	Symbol	Values	Unit
Supply Voltage	VS	-0.3 ... +7	V
Continuous Drain Source Voltage (OUT1...OUT8)	VDS	45	V
Input Voltage, All Inputs and Data Lines	VIN	- 0.3 ... + 7	V
Operating Temperature Range Storage Temperature Range	Tj Tstg	- 40 ... + 150 - 55 ... + 150
Output Current per Channel (see el. characteristics)	ID(lim)	ID(lim) min	A
Output Current per Channel @ TA = 25 (All 8 Channels ON; Mounted on PCB ) 1)	ID	250	mA
Output Clamping Energy ID = 0.25 A	EAS	10	mJ
Power Dissipation (mounted on PCB) @ TA = 25	Ptot	2	W
Electrostatic Discharge Voltage (Human Body Model) according to MIL STD 883D, method 3015.7 and EOS/ESD assn. standard S5.1 - 1993	VESD	2000	V
DIN Humidity Category, DIN 40 040		E
IEC Climatic Category, DIN IEC 68-1		40/150/56
Thermal Resistance junction - pin junction - ambient @ min. footprint	RthJP RthJA	25 80	K/W

1) Output current rating so long as maximum junction temperature is not exceeded. At T_A = 125 °C the output current
has to be calculated using RthJA according mounting conditions.

Description

Octal Low-Side Switch in Smart Power Technology (SPT) TLE6236G with a Serial Peripheral Interface (SPI) and eight open drain DMOS output stages. The TLE 6236 G is protected by embedded protection functions and designed for automotive and industrial applications. The output stages are controlled via an SPI Interface. Additionally four channels can be controlled direct in parallel for PWM applications. The open load detection (pull down sources) can be disabled via the OL/PRG pin. Then the leakage current is reduced to 1A (max.) to avoid e.g. the glowing of LEDs in off state.

Therefore the TLE6236G is particularly suitable for body control units, dash board illumination or engine management systems.

Parameters:

Technical/Catalog Information	TLE6236G
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Package / Case	DSO-28
Mounting Type	Surface Mount
Type	Low Side
Voltage - Supply	4.5 V ~ 5.5 V
On-State Resistance	1.7 Ohm
Current - Output/Channel	250mA
Current - Peak Output	750mA
Packaging	-
Input Type	SPI
Number of Outputs	8
Operating Temperature	-40°C ~ 150°C
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	TLE6236G TLE6236G