TLC279ID

Output Current :
Mounting Style : SMD/SMT
Packaging : Tube
Number of Channels : 4
Shutdown : No
Maximum Operating Temperature : + 85 C
Common Mode Rejection Ratio (Min) : 65 dB
Package / Case : SOIC-14
Input Bias Current (Max) : 60 pA
Operating Supply Voltage : 16 V
Slew Rate : 3.6 V/us
Input Offset Voltage : 0.9 mV


Pinout




Specifications

Supply voltage, V_DD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .18 V
Differential input voltage, V_ID (see Note 2)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . .±V_DD
Input voltage range, V_I (any input). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to V_DD
Input current, I_I  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . .±5 mA
Output current, l_O (each output)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .±30 mA
Total current into V_DD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 45 mA
Total current out of G_ND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 mA
Duration of short-circuit current at (or below) 25°C (see Note 3). . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total dissipation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  .See Dissipation Rating Table
Operating free-air temperature, T_A: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . .0°C to 70°C
                                                   I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40°C to 85°C
                                                   M suffix  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55°C to 125°C
Storage temperature range  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65°C to 150°C
Case temperature for 60 seconds: FK package  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  .260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, or PW package . . . . . . . . . . . .260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package  . . . . . . . . . . . . . . . . . . . .300°C

Description

The TLC279ID quad operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose BiFET devices.

These TLC279ID use Texas Instruments silicon-gate LinCMOSE^TM technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes.

The extremely high input impedance, low bias currents, and high slew rates make these cost-effective devices ideal for applications which have previously been reserved for BiFET and NFET products. Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC274 (10 mV) to the highprecision TLC279ID (900 V). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these TLC279ID a good choice for new state-of-the-art designs as well as for upgrading existing designs.

In general, many features of TLC279ID associated with bipolar technology are available on LinCMOSE^TM operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC279ID. The devices also exhibit low voltage single-supply operation, making TLC279ID ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail.

A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications.

The TLC279ID inputs and outputs are designed to withstand 100-mA surge currents without sustaining latch-up.

The TLC279ID incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance.

The C-suffix devices TLC279ID are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from 40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of 55°C to 125°C.

Parameters:

Technical/Catalog Information	TLC279ID
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	General Purpose
Number of Circuits	4 - Quad
Package / Case	14-SOIC (3.9mm Width), 14-SOL
Slew Rate	5.3 V/s
Gain Bandwidth Product	2.2MHz
Current - Supply	3.8mA
Current - Output / Channel	30mA
Voltage - Supply, Single/Dual (±)	4 V ~ 16 V, ±2 V ~ 8 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	0.7pA
Operating Temperature	-40°C ~ 85°C
Voltage - Input Offset	370V
Drawing Number	296; 4040047-3; D; 14
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TLC279ID TLC279ID 296 1315 5 ND 29613155ND 296-1315-5