TLC274CD

Output Current :
Mounting Style : SMD/SMT
Packaging : Tube
Number of Channels : 4
Shutdown : No
Common Mode Rejection Ratio (Min) : 65 dB
Package / Case : SOIC-14
Maximum Operating Temperature : + 70 C
Input Offset Voltage : 10 mV
Input Bias Current (Max) : 60 pA
Operating Supply Voltage : 16 V
Slew Rate : 3.6 V/us


Pinout




Specifications

Supply voltage, V_DD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .18 V
Differential input voltage, V_ID (see Note 2)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . .±V_DD
Input voltage range, V_I (any input). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to V_DD
Input current, I_I  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . .±5 mA
Output current, l_O (each output)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .±30 mA
Total current into V_DD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 45 mA
Total current out of G_ND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 mA
Duration of short-circuit current at (or below) 25°C (see Note 3). . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total dissipation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  .See Dissipation Rating Table
Operating free-air temperature, T_A: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . .0°C to 70°C
                                                   I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40°C to 85°C
                                                   M suffix  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55°C to 125°C
Storage temperature range  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65°C to 150°C
Case temperature for 60 seconds: FK package  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  .260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, or PW package . . . . . . . . . . . .260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package  . . . . . . . . . . . . . . . . . . . .300°C

Description

The TLC274CD quad operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose BiFET devices.

These TLC274CD use Texas Instruments silicon-gate LinCMOSE^TM technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes.

The extremely high input impedance, low bias currents, and high slew rates make these cost-effective devices TLC274CD ideal for applications which have previously been reserved for BiFET and NFET products. Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC274 (10 mV) to the highprecision TLC279 (900 V). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these TLC274CD a good choice for new state-of-the-art designs as well as for upgrading existing designs.

In general, many features associated with bipolar technology are available on LinCMOSE^TM operational amplifiers, without the power penalties of bipolar technology. General applications of TLC274CD such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC274 and TLC279. The devices also exhibit low voltage single-supply operation, making TLC274CD ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail.

A wide range of packaging options of TLC274CD is available, including small-outline and chip-carrier versions for high-density system applications.

The TLC274CD inputs and outputs are designed to withstand 100-mA surge currents without sustaining latch-up.

The TLC274CD incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance.

The C-suffix devices TLC274CD are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from 40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of 55°C to 125°C.

Parameters:

Technical/Catalog Information	TLC274CD
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Packaging	Tube
Amplifier Type	General Purpose
Number of Circuits	4 - Quad
Package / Case	14-SOIC (3.9mm Width), 14-SOL
Slew Rate	5.3 V/s
Gain Bandwidth Product	2.2MHz
Current - Supply	3.8mA
Current - Output / Channel	30mA
Voltage - Supply, Single/Dual (±)	3 V ~ 16 V, ±1.5 V ~ 8 V
Output Type	-
-3db Bandwidth	-
Current - Input Bias	0.7pA
Operating Temperature	0°C ~ 70°C
Voltage - Input Offset	1100V
Drawing Number	296; 4040047-3; D; 14
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TLC274CD TLC274CD 296 1313 5 ND 29613135ND 296-1313-5