Operational Amplifiers - Op Amps Dual uPwr Lo-Voltage Op Amp
TLC25L2CDR: Operational Amplifiers - Op Amps Dual uPwr Lo-Voltage Op Amp
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $1.83 - 2.88 / Piece
Operational Amplifiers - Op Amps Advanced LinCMOS Low-Noise Precision
US $1.83 - 2.88 / Piece
Operational Amplifiers - Op Amps Advanced LinCMOS Low-Noise Precision
Number of Channels : | 2 | Common Mode Rejection Ratio (Min) : | 65 dB |
Input Offset Voltage : | 10 mV | Input Bias Current (Max) : | 60 pA |
Operating Supply Voltage : | 16 V | Mounting Style : | SMD/SMT |
Package / Case : | SOIC-8 | Slew Rate : | 0.03 V/us |
Shutdown : | No | Maximum Operating Temperature : | + 70 C |
Packaging : | Reel |
The TLC25L2CDR is a low-cost, low-power dual operational amplifiers designed to operate with single or dual supplies. The features of TLC25L2CDR are: (1)A-Suffix Versions Offer 5-mV VIO; (2)B-Suffix Versions Offer 2-mV VIO; (3)Wide Range of Supply Voltages: 1.4 V to 16 V; (4)True Single-Supply Operation; (5)Common-Mode Input Voltage Includes the Negative Rail; (6)Low Noise: 30 nV//Hz Typ at f = 1 kHz(High-Bias Versions).
The following is about the absolute maximum ratings of TLC25L2CDR: (1)Supply voltage, VDD: 18 V; (2)Differential input voltage, VID: ±18 V; (3)Input voltage range, VI (any input): 0.3 V to 18 V; (4)Duration of short circuit at (or below) 25°C free-air temperature: unlimited; (5)Operating free-air temperature range, TA: 0°C to 70°C; (6)Storage temperature range: 65°C to 150°C; (7)Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: 260°C.
The electrical characteristics of the TLC25L2CDR are: (1)input offset voltage: 10mV max at VO = 0 2 V, RS = 50 W, 25°C; (2)Average temperature coefficient of input offset voltage: 1mV/°C at 25°C to 70°C; (3)Input offset current: 1pA at VO = 0.2 V, 25°C; (4)Input bias current: 1pA at VO = 0.2 V, 25°C; (5)Common-mode input voltage range: 0 to 0.2V; (6)Large-signal differential voltage amplification: 10V/mV at VO = 100 to 300 mV, RS = 50 W.
Technical/Catalog Information | TLC25L2CDR |
Vendor | Texas Instruments |
Category | Integrated Circuits (ICs) |
Packaging | Tape & Reel (TR) |
Amplifier Type | General Purpose |
Number of Circuits | 2 - Dual |
Package / Case | 8-SOIC (3.9mm Width) |
Slew Rate | 0.05 V/s |
Gain Bandwidth Product | 110kHz |
Current - Supply | 29A |
Current - Output / Channel | - |
Voltage - Supply, Single/Dual (±) | 1.4 V ~ 16 V, ±0.7 V ~ 8 V |
Output Type | - |
-3db Bandwidth | - |
Current - Input Bias | 0.7pA |
Operating Temperature | 0°C ~ 70°C |
Voltage - Input Offset | 1100V |
Drawing Number | 296; 4040047-2; D; 8 |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | TLC25L2CDR TLC25L2CDR |