TLC2272

Supply voltage, V_DD+ (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 V
Supply voltage, V_DD− (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . −8 V
Differential input voltage, V_ID (see Note 2) . . . . . . . . . . . . . . . . . . .  ±16 V
Input voltage range, VI (any input, see Note 1) . . .  V_DD− − 0.3 V to V_DD+
Input current, I_I (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±5 mA
Output current, I_O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Total current into V_DD+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Total current out of V_DD− . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±50 mA
Duration of short-circuit current at (or below) 25 (see Note 3) . . unlimited
Package thermal impedance, _JA (see Notes 4 and 5): D package (8 pin) . . .97.1/W
D package (14 pin) . . . . . . . . . . . . . . . . . . . 86.2/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . 79.7/W
P package . . . . . . . . . . . . . . . . . . . . . . . . . . 84.6/W
PW package (8 pin) . . . . . . . . . . . . . . . . . . . 149/W
PW package (14 pin) . . . . . . . . . . . . . . . . . . 113/W
Package thermal impedance, JC (see Notes 4 and 5): FK package . . . .  5.6/W
J package . . . . . . . . . . . . . . . . . . . . . . . . . . 15.1/W
U package . . . . . . . . . . . . . . . . . . . . . . . . . . 14.7/W
Operating free-air temperature range, TA: C suffix . . . . 0 to 70
I, Q suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .−40 to 125
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55 to 125
Storage temperature range . . . . . . . . . . . . . . . . . . −65 to 150
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, P or PW package . . 260
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J or U package . . . . . . 300

† Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between V_DD+ and V_{DD −.}
2. Differential voltages are at I_N+ with respect to I_{N −.} Excessive current will flow if input is brought below V_DD− − 0.3 V.
3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded.
4. Maximum power dissipation is a function of T_J(max), _JA, and T_A. The maximum allowable power dissipation at any allowable ambient temperature is P_D = (T_J(max) − T_A)/_JA. Operating at the absolute maximum T_J of 150 can affect reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7 (plastic) or MIL-STD-883 Method 1012 (ceramic).

The TLC2272 and TLC2274 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x family offers 2 MHz of bandwidth and 3 V/s of slew rate for higher speed applications.These devices offer comparable ac performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x has a noise voltage of 9 nV/Hz, two times lower than competitive solutions.

The TLC227x, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC227xA family is available with a maximum input offset voltage of 950 V. This family is fully characterized at 5 V and ±5 V.

The TLC2272/4 also makes great upgrades to the TLC272/4 or TS272/4 in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If the design requires single amplifiers, see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.