TL750M05CKTTR

Number of Outputs : 1
Maximum Operating Temperature : + 125 C
Mounting Style : SMD/SMT
Output Voltage : 5 V
Output Type : Fixed
Load Regulation : 50 mV
Input Voltage MAX : 26 V
Package / Case : PFM-3
Output Current : 750 mA
Dropout Voltage (Max) : 0.5 V at 500 mA


Description

The TL750M05CKTTR is designed as low-dropout positive voltage regulator specifically for battery-powered systems. It incorporates onboard overvoltage and current-limiting protection circuitry to protect the devices and the regulated system. It is fully protected against 60V load-dump and reverse-battery conditions. Extremely low quiescent current, even during full-load conditions, makes it ideal for standby power systems.

TL750M05CKTTR has seven features. (1)Very low dropout voltage, less than 0.6V at 750mA. (2)Low quiescent current. (3)TTL- and CMOS-compatible enable. (4)60V load dump protection. (5)Overvoltage protection. (6)Internal thermal overload protection. (7)Internal overcurrent-limiting circuitry. That are all the main features.

Some absolute maximum ratings of TL750M05CKTTR have been concluded into several points as follow. (1)Its continuous input voltage would be 26V. (2)Its transient input voltage would be 60V. (3)Its continuous reverse input voltage would be -15V. (4)Its transient reverse input voltage would be -50V. (5)Its package thermal impedance would be 22°C/W for KC package and 23°C/W for KTE package and 23°C/W for KTG package and 28°C/W for KTP package and would be 25.3°C/W for KTT package. (6)Its virtual junction temperature range would be from 0°C to 150°C. (7)Its lead temperature would be 260°C. (8)Its storage temperature range would be from -65°C to 150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of TL750M05CKTTR are concluded as follow. (1)Its output voltage would be min 4.95V and typ 5V and max 5.05V. (2)Its input voltage regulation would be typ 10mV and max 25mV for Vi=9V to 16V and would be typ 12mV and max 50mV for Vi=6V to 26V. (3)Its ripple rejection would be min 50dB and typ 55dB. (4)Its output regulation voltage would be typ 20mV and max 50mV. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!

Parameters:

Technical/Catalog Information	TL750M05CKTTR
Vendor	Texas Instruments
Category	Integrated Circuits (ICs)
Regulator Type	Single Output
Package / Case	D²Pak, SMD-220, TO-263 (3 leads + tab)
Packaging	Tape & Reel (TR)
Regulator Topology	Positive Fixed
Current - Output	750mA
Voltage - Output	5V
Operating Temperature	0°C ~ 125°C
Voltage - Input	6 ~ 26 V
Number of Regulators	1
Current - Limit (Min)	-
Current Short Circuit (Isc)	-
Drawing Number	296; 4200577-2; KTT; 3
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TL750M05CKTTR TL750M05CKTTR 296 20776 2 ND 296207762ND 296-20776-2