Features: Very Low Dropout Voltage, Less Than 0.6 V at150 mAVery Low Quiescent CurrentTTL- and CMOS-Compatible Enable onTL751L Series60-V Load-Dump ProtectionReverse Transient Protection Down to 50 VInternal Thermal-Overload ProtectionOvervoltage ProtectionInternal Overcurrent-Limiting CircuitryLe...
TL750L: Features: Very Low Dropout Voltage, Less Than 0.6 V at150 mAVery Low Quiescent CurrentTTL- and CMOS-Compatible Enable onTL751L Series60-V Load-Dump ProtectionReverse Transient Protection Down to 50 ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Very Low Dropout Voltage, Less Than 0.6 V at150 mA
Very Low Quiescent Current
TTL- and CMOS-Compatible Enable onTL751L Series
60-V Load-Dump Protection
Reverse Transient Protection Down to 50 V
Internal Thermal-Overload Protection
Overvoltage Protection
Internal Overcurrent-Limiting Circuitry
Less Than 500-A Disable (TL751L Series)
|
MIN MAX |
UNIT | |
Continuous input voltage |
26 |
V | |
Transient input voltage(2) |
TA = 25 |
60 |
V |
Continuous reverse input voltage |
15 |
V | |
Transient reverse input voltage |
t 100 ms |
50 |
V |
TJ Operating virtual junction temperature |
150 |
||
Lead temperature |
1,6 mm (1/16 in) for 10 s |
260 |
|
Tstg Storage temperature range |
65 150 |
The TL750L and TL751L series of fixed-output voltage regulators offer 5-V, 8-V, 10-V, and 12-V options. TheTL751L series also has an enable (ENABLE ) input. When ENABLE is high, the regulator output is placed in thehigh-impedance state. This gives the designer complete control over power up, power down, or emergencyshutdown.
The TL750L and TL751L series are low-dropout positive-voltage regulators specifically designed forbattery-powered systems. These devices incorporate overvoltage and current-limiting protection circuitry, alongwith internal reverse-battery protection circuitry to protect the devices and the regulated system. The series isfully protected against 60-V load-dump and reverse-battery conditions. Extremely low quiescent current duringfull-load conditions makes these devices ideal for standby power systems.