TDA4605-3

Number of Outputs :
Output Current :
Switching Frequency :
Operating Supply Voltage :
Supply Current :
Maximum Operating Temperature :
Minimum Operating Temperature :
Mounting Style :
Package / Case :
Packaging : Tube


Features:

· Fold-back characteristics provides overload protection for external components
· Burst operation under secondary short-circuit condition implemented
· Protection against open or a short of the control loop
· Switch-off if line voltage is too low (undervoltage switch-off)
· Line voltage depending compensation of fold-back point
· Soft-start for quiet start-up without noise generated by the transformer
· Chip-over temperature protection implemented (thermal shutdown)
· On-chip ringing suppression circuit against parasitic oscillations of the transformer
· AGC-voltage reduction at low load


Specifications

Parameter	Symbol	Limit Values		Unit	Remarks
		min.	max.
Voltages pin 1 pin 2 pin 3 pin 5 pin 6 pin 7	V1 V2 V3 V5 V6 V7	0.3 0.3 0.3 0.3 0.3 0.3	3 V6 20 6	V V V V V V	Supply voltage
Currents pin 1 pin 2 pin 3 pin 4 pin 5 pin 6 pin 7 pin 8	V1 V2 V3 V4 V5 V6 V7 V8	1.5 1.5 3	3 3 3 1.5 1.5 3 3	mA mA mA A A A mA mA	tp 50 s; v 0.1*) tp 50 s; v 0.1 tp 50 s; v 0.1
Junction temperature	Tj		125
Storage temperature	Tstg	40	125

Description

The IC TDA4605-3 controls the MOS-power transistor and performs all necessary control and protection functions in free running flyback converters. Because of the fact that a wide load range is achieved, this IC is applicable for consumer as well as industrial power supplies.

The serial circuit and primary winding of the flyback transformer are connected in series to the input voltage. During the switch-on period of the transistor, energy is stored in the transformer. During the switch-off period the energy is fed to the load via the secondary winding. By varying switch-on time of the power transistor, the TDA4605-3 controls each portion of energy transferred to the secondary side such that the output voltage remains nearly independent of load variations. The required control information is taken from the input voltage during the switch-on period and from a regulation winding during the switch-off period. A new cycle will start if the transformer has transferred the stored energy completely into the load.

Parameters:

Technical/Catalog Information	TDA4605-3
Vendor	Infineon Technologies
Category	Integrated Circuits (ICs)
Type	-
Voltage - Supply	7.5 V ~ 15.5 V
Current - Supply	11mA
Voltage - Input	-
Package / Case	8-DIP
Packaging	Tube
Applications	Power Supply Controller
Operating Temperature	-20°C ~ 85°C
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	TDA4605 3 TDA46053