TD62301P

The TD62301P is designed as low saturation sink driver which comprised of seven NPN low saturation drivers. It features integral clamp diodes for switching inductive loads. Applications include relay, hammer, lamp and LED driver in low voltage system.

TD62301P has seven features. (1)Package type is DIP 16 pin. (2)Output rating (single output) 15V/ 200mA max. (3)Low saturation voltage Vce(sat)=0.7V max. (4)Inputs compatible with TTL and 3 to 6V CMOS. (5)High DC transfer ratio which would be min 1000. (6)Output clamp diodes. (7)Input register would be R1=2kohms and R2=20kohms. Those are all the main features.

Some absolute maximum ratings TD62301P have been concluded into several points as follow. (1)Its supply voltage would be from -0.5V to 15V. (2)Its output sustaining voltage would be from -0.5V to Vcc+0.5V. (3)Its output current would be 200mA/ch. (4)Its input voltage would be from -0.5V to 15V. (5)Its input current would be 15mA. (6)Its clamp diode reverse voltage would be 15V. (7)Its clamp diode forward current would be 200mA. (8)Its power dissipation would be 1W. (9)Its operating temperature range would be from -30°C to 75°C. (10)Its storage temperature range would be from -55°C to 150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics TD62301P are concluded as follow. (1)Its output leakage current would be max 1uA. (2)Its output saturation voltage would be max 0.5V at Iin=0.14mA and would be max 0.7V at Iin=0.3mA and Iout=150mA. (3)Its DC forward current transfer ratio would be min 1000. (4)Its input current would be max 0.6mA for output on. (5)Its clamp diode forward voltage would be typ 2.0V. (6)Its supply current would be typ 15mA and max 22mA. And so on. If you have any question or suggestion or want to know more information please contact us for TD62301P details. Thank you!