TD62007P

The TD62007P is designed as a high voltage and high current darlington driver comprised of seven NPN darlington pairs. It features integral clamp diodes for switching inductive loads and protective diodes against a negative input voltage.

TD62007P has seven features. (1)Output current (single output) would be max 150mA. (2)High sustaining voltage output 22V min. (3)Output clamp diodes. (4)Protective diodes against a negative input voltage. (5)Inputs base resistor Rin=20kohms. (6)Inputs compatible with 9 to 15V PMOS, CMOS. (7)Package type is DIP-16 pin. Those are all the main features.

Some absolute maximum ratings TD62007P have been concluded into several points as follow. (1)Its output sustaining voltage would be from -0.5V to 22V. (2)Its output current would be 150mA/ch. (3)Its input voltage would be from -37V to 22V. (4)Its clamp diode reverse voltage would be 22V. (5)Its clamp diode r=forward current would be 150mA. (6)Its power dissipation would be 1.0W. (7)Its operating temperature range would be from -30°C to 75°C. (8)Its storage temperature range would be from -55°C to 150°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics TD62007P are concluded as follow. (1)Its output leakage current would be max 100uA. (2)Its collector to emitter saturation voltage would be max 1.6V. (3)Its DC current transfer ratio would be min 800. (4)Its input current high would be max 0.7mA. (5)Its input current low would be max -10uA. (5)Its input voltage high would be min 1V. (6)Its input voltage low would be min 1V. (7)its clamp diode reverse current would be max 30uA. (8)Its clamp diode forward voltage would be max 1.6V. (9)Its turn-on delay would be typ 0.1us. (10)Its turn-off delay would be typ 0.4us. And so on. If you have any question or suggestion or want to know more information please contact us for TD62007P details. Thank you!