Specifications SYMBOL PARAMETER RATING UNIT VCC Power supply voltage −0.5~7.0 V VIN DC input voltage −0.5~7.0 V VOUT DC output voltage −0.5~7.0 (Note 2)−0.5~VCC + 0.5 (Note 3) V IIK Input diode current −50 mA IOK Output diode curr...
TC7MZ240FK: Specifications SYMBOL PARAMETER RATING UNIT VCC Power supply voltage −0.5~7.0 V VIN DC input voltage −0.5~7.0 V VOUT DC output voltage −0.5~7.0 (Note 2)&...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: Low voltage operation: VCC = 1.8~3.6 VHigh speed operation: tpd = 3.5 ns (max) (VCC = 3....
Features: • Low voltage operation: VCC = 1.8~3.6 V• High speed operation: tpd = 3.0 ns...
Features: • 26 series resistors on outputs.• Low voltage operation: VCC = 1.8~3.6 V...
SYMBOL | PARAMETER | RATING | UNIT |
VCC | Power supply voltage | −0.5~7.0 | V |
VIN | DC input voltage | −0.5~7.0 | V |
VOUT | DC output voltage | −0.5~7.0 (Note 2) −0.5~VCC + 0.5 (Note 3) |
V |
IIK | Input diode current | −50 | mA |
IOK | Output diode current | ±50 (Note 4) | mA |
IOUT | DC output current | ±50 | mA |
PD | Power dissipation | 180 | mW |
ICC/IGND | DC VCC/GND current | ±100 | mA |
Tstg | Storage temperature | 65 to +150 |
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Note 2: Output in off-state
Note 3: High or low state. IOUT absolute maximum rating must be observed.
Note 4: VOUT < GND, VOUT > VCC
The TC7MZ240FK is a high performance CMOS octal bus buffer. Designed for use in 3.3 V systems, it achieves high speed operation while maintaining the CMOS low power dissipation.
The TC7MZ240FK is designed for low-voltage (3.3 V) VCC applications, but it could be used to interface to 5 V supply environment for both inputs and outputs.
The TC7MZ240FK is an inverting 3-state buffer having two active-low output enables. This device is designed to be used with 3-state memory address drivers, etc.
All inputs of TC7MZ240FK are equipped with protection circuits against static discharge.