TC7MP85410FT

Features:

• Outputs have 47- (typ.) resistors connected in series.
• High speed: t_pd = 4.5 ns (typ.) at V_CC = 5 V
• TTL-level inputs: V_IL = 0.8 V (max) V_IH = 2.0 V (max)
• Power-down protection is provided on all inputs.
• Low noise: V_OLP = 0.35 V (typ)


Pinout




Specifications

Characteristics	Symbol	Rating	Unit
Supply Voltage range	VCC	-0.5~7	V
DC input Voltage	VIN	-0.5~7	V
DC output Voltage	VOUT	−0.5 to 7.0 (Note 2)	V V
		−0.5 to VCC + 0.5 (Note 3)
Input diode Current	IIK	-20	mA
Output diode Current	IOK	±20 (Note 4)	mA
DC output Current	IOUT	±25	mA
DC VCC/ground current	ICC	±75	mA
Power Dissipation	PD	180	mW
Storage Temperature	TSTG	-65 to 150

Note 1: Exceeding any of the absolute maximum ratings, even briefly, may lead to deterioration in IC
             performance or even destruction.

             Using continuously under heavy loads (e.g. the application of  high temperature/current/voltage
             and the significant change in temperature, etc.) may cause this product to decrease in the
             reliability  significantly even if the operating conditions (i.e. operating temperature/current/voltage,
             etc.) are within the absolute maximum ratings and the operating ranges.

             Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability
             Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data
             (i.e. reliability test report and estimated failure rate, etc).
Note 2: V_CC = 0 V
Note 3: High or Low stats. IOUT absolute maximum rating must be observed.
Note 4: V_OUT < GND, V_OUT > V_CC



Description

The TC7MP85410FT is an advanced high-speed CMOS octal bus buffer fabricated with silicon-gate CMOS technology. It achieves high-speed operation similar to the equivalent bipolar Schottky TTL while maintaining the CMOS low power dissipation. The inputs are compatible with TTL voltage levels, so to the TC7MP85410FT can be used as a level converter for interfacing 3.3-V systems to 5-V systems.

The TC7MP85410FT  is a non-inverting bus buffer.

The outputs of TC7MP85410FT have 47- (typ.) resistors connected in series, which can reduce reflection noise without using external resistors. Input and output protection circuits ensure that 0 to 5.5V can be applied to the input and output*1 pins without regard to the supply voltage.

Since power-down protection is provided on both inputs and outputs, the TC7MP85410FT can be used in a wide range of applications, such as interfacing between two different voltage systems, backup battery systems and so on.