Features: `High speed: tpd= 5.6 ns (typ.) (VCC = 5 V) `Low power dissipation: ICC= 4 A (max) (Ta = 25)`Compatible with TTL outputs: VIL= 0.8 V (max) VIH= 2.0 V (min)`Power down protection is provided on all inputs and outputs. Balanced propagation delays: tpLHtpHL `Low noise:VOLP= 1.0 V (max)`Pin ...
TC7MET244AFK: Features: `High speed: tpd= 5.6 ns (typ.) (VCC = 5 V) `Low power dissipation: ICC= 4 A (max) (Ta = 25)`Compatible with TTL outputs: VIL= 0.8 V (max) VIH= 2.0 V (min)`Power down protection is provide...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: Low voltage operation: VCC = 1.8~3.6 VHigh speed operation: tpd = 3.5 ns (max) (VCC = 3....
Features: • Low voltage operation: VCC = 1.8~3.6 V• High speed operation: tpd = 3.0 ns...
Features: • 26 series resistors on outputs.• Low voltage operation: VCC = 1.8~3.6 V...
Characteristics |
Symbol |
Rating |
Unit |
Supply voltage range |
VCC |
-0.5~7.0 |
V |
DC input voltage |
VIN |
-0.5~7.0 |
V |
DC output voltage |
VOUT |
-0.5~7.0(Note 2) |
V |
-0.5~VCC+0.5 (Note 3) | |||
Input diode current |
IIK |
-20 |
mA |
Output diode current |
IOK |
±20 (Note 4) |
mA |
DC output current |
IOUT |
±25 |
mA |
DC VCC /ground current |
ICC |
±75 |
mA |
Power dissipation |
PD |
180 |
mW |
Storage temperature |
Tstg |
-65~150 |
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Note 2: Output in off-state
Note 3: High or low state. IOUT absolute maximum rating must be observed.
Note 4: VOUT<GND, VOUT>VCC