Features: • Operating voltage: VCC = 4.5~5.5 V• High speed: tpd = 0.25 ns (max)• Low on resistance: RON = 5 (typ.)• ESD performance: Machine model ±200 V Human body model ±2000 V• Compatible with TTL outputs (control inputs)• Package: VSSOP (US20)• Pin ...
TC7MB3245FK: Features: • Operating voltage: VCC = 4.5~5.5 V• High speed: tpd = 0.25 ns (max)• Low on resistance: RON = 5 (typ.)• ESD performance: Machine model ±200 V Human body model ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: Low voltage operation: VCC = 1.8~3.6 VHigh speed operation: tpd = 3.5 ns (max) (VCC = 3....
Features: • Low voltage operation: VCC = 1.8~3.6 V• High speed operation: tpd = 3.0 ns...
Features: • 26 series resistors on outputs.• Low voltage operation: VCC = 1.8~3.6 V...
Characteristics | Symbol | Rating | Unit |
Power supply range | VCC | −0.5~7.0 | V |
DC input voltage | VIN | −0.5~7.0 | V |
DC switch voltage | VS | −0.5~7.0 | V |
Input diode current | IIK | −50 | mA |
Continuous channel circuit | IS | 128 | mA |
Power dissipation | PD | 180 | mW |
DC VCC/ground current | ICC/IGND | ±100 | mA |
Storage temperature | Tstg | −65~150 | °C |
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
The TC7MB3245FK provides eight bits of high-speed TTL-compatible bus switching in a standard '245 device pinout.
The low on-state resistance of the switch allows connections to be made with minimal propagation delay.
The TC7MB3245FK is organized as one 8-bit switch. When output enable (OE) is low, the switch is on and port A is connected to port B. When OE is high, the switch is open and a high-impedance state exists between the two ports.
All inputs of TC7MB3245FK are equipped with protection circuits against static discharge.