Features: • Fixed Output Voltages: 1.8V, 2.5V, 3.0V, 3.3V• Very Low Dropout Voltage• Rated 800mA Output Current• High Output Voltage Accuracy• Standard or Custom Output Voltages• Over-Current and Over-Temperature Protection• Space Saving SOT-223 PackageApp...
TC2117: Features: • Fixed Output Voltages: 1.8V, 2.5V, 3.0V, 3.3V• Very Low Dropout Voltage• Rated 800mA Output Current• High Output Voltage Accuracy• Standard or Custom Output...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Input Voltage ...........................................................6.5V
Output Voltage.................... (VSS 0.3) to (VIN + 0.3V)
Power Dissipation..................Internally Limited (Note 7)
Maximum Voltage on Any Pin ............VIN +0.3V to -0.3V
Operating Temperature ................. -40 < TJ < +125
Storage temperature ............................-65 to +150
*Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These
are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of the specifications is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability.
Parameter Name | Value |
Max Input Voltage | 6 |
Output Voltage (v) | 1.8, 2.5, 3.0, 3.3 |
Typical Active Current (A) | 80 |
Typical Dropout Voltage @ Max. lout (mV) | 600 |
Typical Output Voltage Accuracy (%) | 0.5 |
Output Capacitor Type | Aluminum/Tantalum |
The TC2117 is a fixed, high accuracy (typically ±0.5%) CMOS low dropout regulator. Designed specifically for battery operated systems, the TC2117's CMOS construction eliminates wasted ground current, significantly extending battery life. Total supply current is typically 80µA at full load (20 to 60 times lower than in bipolar regulators).
TC2117 key features include ultra low noise, very low dropout voltage (typically 450mV at full load), and fast response to step changes in load. The TC2117 incorporates both over-temperature and over-current protection. The TC2117 is stable with an output capacitor of only 1µF and has a maximum output current of 800mA. This device is available in 3-Pin SOT-223, and 3-Pin DDPAK packages.