Core Size: 8-Bit
Program Memory Type: FLASH
Operating Temperature: -40°C ~ 85°C
Data Converters: A/D 8x10b
Oscillator Type: External
Packaging: Tray
Number of I /O: 20
Voltage - Supply (Vcc/Vdd): 3 V ~ 5.5 V
RAM Size: 512 x 8
Program Memory Size: 16KB (16K x 8)
Speed: 40MHz
Peripherals: POR, PWM, WDT
Package / Case: 32-LQFP
EEPROM Size: 2K x 8
Manufacturer: Atmel
Core Processor: 8051
Series: AT89C CAN
Connectivity: CAN, UART/USART
DescriptionThe T89C51CC02CA-RATIM is designed as one member of the CANary family of 8-bit microcontrollers dedicated to CAN network applications, it is a low-pin count 8-bit Flash microcontroller. In X2 Mode a maximum external clock rate of 20MHz reaches a 300ns cycle time.
T89C51CC02CA-RATIM has many features. (1)80C51 core architecture. (2)256 bytes of on-chip RAM. (3)256 bytes of on-chip XRAM. (4)16K bytes of on-chip flash memory which means data retention: 10 years at 85°C and erase /write cycle: 100K. (5)2K bytes of on-chip flash for bootloader. (6)2K bytes of on-chip EEPROM which means erase /write cycle: 100K. (7)14-sources 4-level interrupts. (8)Three 16-bit timers /counters. (9)Full duplex UART compatible 80C51. (10)Maximum crystal frequency 40MHz. In X2 mode, 20MHz (CPU core, 40MHz). (11)Three or four ports: 16 or 20 digital I/O lines. And so on.
Some absolute maximum ratings of T89C51CC02CA-RATIM have been concluded as follow. (1)Its operating temperature industrial would be from -40°C to 85°C. (2)Its storage temperature range would be from -65°C to +150°C. (3)Its voltage on Vcc from Vss would be from -0.5V to +6V. (4)Its voltage on any pin from Vss would be from -0.5V to Vcc+0.2V. (5)Its power dissipation would be 1W. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.
Also some DC characteristics about T89C51CC02CA-RATIM are concluded as follow. (1)Its input low voltage would be min -0.5V and max 0.2Vcc-0.1V. (2)Its input high voltage except XTAL1, RST would be min 0.2Vcc+0.9V and max Vcc+0.5V. (3)Its input high voltage XTAL1, RST would be min 0.7Vcc and max Vcc+0.5V. (4)Its output low voltage ports 1, 2, 3, 4 would be max 0.3V at Iol=100uA and max 0.45V at Iol=1.6mA and max 1.0V at Iol=3.5mA. (5)Its input leakage current would be max +/-10uA. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!
Parameters: | Technical/Catalog Information | T89C51CC02CA-RATIM |
| Vendor | Atmel |
| Category | Integrated Circuits (ICs) |
| Program Memory Size | 16K x 8 |
| RAM Size | 512 x 8 |
| Number of I /O | 20 |
| Package / Case | 32-VQFP |
| Speed | 40MHz |
| Controller Series | AT89C CAN |
| Oscillator Type | Internal |
| Packaging | Tray |
| Program Memory Type | FLASH |
| EEPROM Size | 2K x 8 |
| Core Processor | 8051 |
| Data Converters | A/D 8x10b |
| Core Size | 8-Bit |
| Operating Temperature | -40°C ~ 85°C |
| Connectivity | CAN, UART/USART |
| Peripherals | POR, PWM, WDT |
| Voltage - Supply (Vcc/Vdd) | 3 V ~ 5.5 V |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | T89C51CC02CA RATIM
T89C51CC02CARATIM
T89C51CC02CARATIM ND
T89C51CC02CARATIMND
T89C51CC02CARATIM
|
T89C51CC02CA-RATIM Data Sheet
