Features: ·Support max. 132RGB x 132 matrix panel + icon line·Power supply: VDD=2.4-3.5V VDDIO=1.5V - 3.5V VCC=7.0V - 18.0V·OLED driving output voltage, 16V maximum·DC-DC voltage booster controller·Segment maximum source current: 200uA·Common maximum sink current: 80mA·Embedded 132x133x18 bit SRAM...
SSD1339: Features: ·Support max. 132RGB x 132 matrix panel + icon line·Power supply: VDD=2.4-3.5V VDDIO=1.5V - 3.5V VCC=7.0V - 18.0V·OLED driving output voltage, 16V maximum·DC-DC voltage booster controller·...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
· Support max. 132RGB x 132 matrix panel + icon line
· Power supply: VDD=2.4-3.5V VDDIO=1.5V - 3.5V VCC=7.0V - 18.0V
· OLED driving output voltage, 16V maximum
· DC-DC voltage booster controller
· Segment maximum source current: 200uA
· Common maximum sink current: 80mA
· Embedded 132x133x18 bit SRAM display buffer
· 16 step master current control, and 256 step current control for the three color components
· Smart Icon mode
· Programmable color mode of 256, 65k, 262k
· Programmable Frame Rate
· Graphic Acceleration Command Set (GAC)
· 8/9/16/18-bit 6800-series Parallel Interface, 8/9/16/18-bit 8080-series Parallel Interface and Serial Peripheral
nterface.
· Wide range of operating temperature: -40 to 90 °C
Symbol |
Parameter |
Value |
Unit |
VDD |
Supply Voltage |
-0.3 to +4 |
V |
VCC |
0.0 to 18 |
V | |
VREF |
0.0 to 18 |
V | |
VCOMH |
Supply Voltage/Output voltage |
0.0 to 16 |
V |
- |
SEG/COM output voltage |
0.0 to 16 |
V |
Vin |
Input voltage |
Vss-0.3 to Vdd+0.3 |
V |
TA |
Operating Temperature |
-40 to +90 |
ºC |
Tstg |
Storage Temperature Range |
-65 to +150 |
ºC |
*Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the limits in the Electrical Characteristics tables or Pin Description.
The SSD1339 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. SSD1339 consists of 396 segments (132RGB), 132 commons and 2 smart icon lines. This IC is designed for Common Cathode type OLED panel.
The SSD1339 displays data directly from its internal 132x133x18 bits Graphic Data RAM (GDDRAM). Data/Commands are sent from general MCU through the hardware selectable 6800/8000 series compatible Parallel Interface or Serial Peripheral Interface. SSD1339 has a 256 steps contrast control and 262k color control