Features: ` Fast acquisition time: 10ns to ±0.1% 15ns to ±0.024% 20ns to ±0.012%` ±0.006% Nonlinearity` 65Vrms output noise` 120MHz small signal bandwidth` 55MHz full power bandwidth` 80dB feedthrough` 1ps Aperture jitter` 250mW power dissipation` Low costSpecifications PARAMETERS LIMITS UN...
SHM-12: Features: ` Fast acquisition time: 10ns to ±0.1% 15ns to ±0.024% 20ns to ±0.012%` ±0.006% Nonlinearity` 65Vrms output noise` 120MHz small signal bandwidth` 55MHz full power bandwidth` 80dB feedthrou...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PARAMETERS | LIMITS | UNITS |
+5V Supply | 0 to +6 | Volts |
5V Supply | 0 to -6 | Volts |
Analog Input | +5V Supply 1 | Volts |
5V Supply +1 | Volts | |
Continuous Output Current | ±50 | mA |
Digital Inputs | <Supply Voltages | Volts |
Junction Temperature | +175 | |
Lead Temperature (10 seconds) | +300 | |
Output shorted to any supply will cause permanent damage. |
The SHM-12 is an extremely high-speed and accurate monolithic sample-and-hold amplifier designed for fast data acquisition applications. The SHM-12 is accurate (±1LSB at 12 bits over the full military temperature range) and is very fast (10ns and 15ns acquisition times to accuracies of 10 and 12-bits, respectively). With this high performance and a full power bandwidth of 55MHz, the SHM-12 is an ideal device for driving flash and high-resolution subranging A/D converters.
A careful design optimizes the SHM-12 for accuracy and speed over the full military temperature range. The droop rate is a low ±0.5mV/s. The 30mA output current and guaranteed specifications for a 100W load provide high drive capability. Operating from ±5V supplies, the SHM-12 consumes only 250mW of power.