S6510P

Features:

• No lamp protection
• Low Start up & Operating Current
• Internal Soft Start
• Flexible Soft Start Frequency
• Trimmed 1.5% internal Reference
• Under Voltage Lock Out with Hysteresis
• High Current Totem Pole Gate Drive




Pinout






Specifications

CHARACTERISTICS	SYMBOL	VALUE	UNITS
Supply Voltage	VCC	18	V
Peak Drive Output Current	Ioh, lol	±400	mA
Driver Output Clamping Diodes Vo>Vcc or Vo<-0.3V	Iclamp	±10	mA
Error Amp, Compensation and Multiplier Input Voltage	Vin	-0.3 to 6	V
Power Dissipation @ Pamb=50	Pd	0.8	W

Description

The S6510P provides simple and performance electronics ballast control function for the half bridge L/C resonant inverter. This device is optimized for electronics ballast requiring a minimum board area, reduced component count and low power dissipation.

Internal soft start circuitry eliminates the need for an external soft start PTC resistor.

The initial soft start frequency and soft start time can be easily adjusted depending on the types of lamp. Prevent burning out of switches in no lamp condition. Internal 18V regulator clamps Vcc line of supply voltage for eliminating an external zener diode.

The S6510P provides simple and performance electronics ballast control function for the half bridge L/C resonant inverter. This device is optimized for electronics ballast requiring a minimum board area, reduced component count and low power dissipation.