DescriptionThe S29AL008D55MFIR13 is designed as an 8Mbit, 3.0 volt-only flash memory organized as 1,048,576 bytes or 524,288 words. This device requires only a single, 3.0 volt Vcc supply to perform read, program, and erase operations. A standard EPROM programmer can also be used to program and er...
S29AL008D55MFIR13: DescriptionThe S29AL008D55MFIR13 is designed as an 8Mbit, 3.0 volt-only flash memory organized as 1,048,576 bytes or 524,288 words. This device requires only a single, 3.0 volt Vcc supply to perform...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The S29AL008D55MFIR13 is designed as an 8Mbit, 3.0 volt-only flash memory organized as 1,048,576 bytes or 524,288 words. This device requires only a single, 3.0 volt Vcc supply to perform read, program, and erase operations. A standard EPROM programmer can also be used to program and erase the device.
S29AL008D55MFIR13 has many features. (1)Single power supply operation. (2)Manufactured on 200nm process technology. (3)Flexble sector architecture. (4)Unlock bypass program command. (5)Top or bottom boot block configurations available. (6)Embedded algorithms. (7)Compatibility with JEDEC standards. (8)High performance and access time as fast as 55ns. (9)Ultra low power consumption (typical values at 5MHz). (10)Cycling endurance: 1,000,000 cycles per sector typical. (11)Data retention: 20 years typical. Those are all the main features.
Some absolute maximum ratings of S29AL008D55MFIR13 have been concluded into several points as follow. (1)Its storage temperature range would be from -65°C to 150°C. (2)Its ambient temperature with power applied would be from -65°C to 125°C. (3)Its voltage with respect to ground Vcc would be from -0.5V to 4.0V. (4)Its A9, OE#, and RESET# would be from -0.5V to 12.5V. (5)Its all other pins would be from -0.5V to Vcc+0.5V. (6)Its output short circuit current would be 200mA. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to S29AL008D55MFIR13.
Also some electrical characteristics of S29AL008D55MFIR13 are concluded as follow. (1)Its input load current would be max +/-1.0uA. (2)Its A9 input load current would be max 35uA. (3)Its output leakage current would be max +/-1.0uA. (4)Its Vcc active write current would be typ 20mA and max 35mA. (5)Its input low voltage would be min -0.5V and max 0.8V. (6)Its input high voltage would be min 0.7Vcc and max Vcc+0.3V. And so on. If you have any question or suggestion or want to konw more information about this IC S29AL008D55MFIR13 please contact us for more details. Thank you!