Features: • Low noise and good PSRR LDO regulators for RF and analog block.• LDO with Power Save mode can be embedded.• Standard LDO for Base Band I/O• Vibrator VR• RTC VR with very low quiescent current• Backup VR with very low quiescent current (Charger for a ...
R5313B: Features: • Low noise and good PSRR LDO regulators for RF and analog block.• LDO with Power Save mode can be embedded.• Standard LDO for Base Band I/O• Vibrator VR• RTC...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Item | Condetions | Rating | Unit |
VBAT | Power Supply Voltage | Battery Voltage Input Pins | −0.3 to 6.5 | V |
VCHG | Cherger Terminal Input Voltage | CHG-IN Pin | −0.3 to 6.5*Note1 | V |
−0.3 to 8.0*Note2 | ||||
VIN | Input Voltage Range | All Input Pins | −0.3 to 6.5 | V |
IOUT | Output Current | Regulator Output Pins (Except Reg 3/4/5/8) |
IOUT(Min.)*2 | |
VPAD(REG3) | 150 | mA | ||
V-VIB(Reg8) | 160 | |||
BUZOUT | 150 | |||
LED-OUT | 10 | |||
PD | Power Dissipation | Mounted on Board, Topt=85°C; See Below |
800 | mW |
Tstg | Storage Temperature | −55 to +125 | °C |
*Note 1: Bias Input
*Note 2: Pulse Input (1s) 30000 Times
Power Dissipation on CSP0505-48
Conditions: Board Size 50mm*108mm*1.27mm, Material: FR4, Wiring Density 250%/ Four Layers, Tj=125°C Wind Velocity: 0m/s, ja=50°C/W
The R5313B Series are complete power management system device for cellular phone, especially GSM handset application. The R5313B Series consists of nine voltage regulators, a large current regulator, Li-ion battery charger controller, several protection circuits, and SIM-I/F (can be used as two kinds voltage alternative regulator). The output voltages of all regulators are able to set different output voltage independently by laser trim as well as detector thresholds.
A tiny 48-pin CSP, 0.65mm ball pitch, is available.