Output Type: AC, DC
Mounting Type: Surface Mount
Termination Style: Gull Wing
Relay Type: Relay
Packaging: Tube
Voltage - Input: 1.2VDC
Load Current: 120mA
Voltage - Load: 0 ~ 400 V
On-State Resistance: 35 Ohm
Circuit: DPST (2 Form A)
Package / Case: 8-SMD (0.300", 7.62mm)
Series: PVT, HEXFET®
Manufacturer: International Rectifier
Supplier Device Package: Thin-Pak
Features: HEXFET Power MOSFET output
Bounce-free operation
3,750 VRMS I/O isolation
Load current limiting
Linear AC/DC operation
Solid-State Reliability
BABT certifiedApplicationOn/Off Hook switch
Dial-Out relay
Ring injection relay
General switchingSpecifications
| GENERAL CHARACTERISTICS |
Limits |
Units |
|
Minimum Dielectric Strength, Input-Output |
3750 |
VRMS |
| Minimum Dielectric Strength, Pole-to-Pole |
1000 |
VDC |
|
Minimum Insulation Resistance, Input-Output, @TA=+25°C, 50%RH, 100VDC 1012
Maximum Capacitance, Input-Output |
1012
1.0 |
pF |
|
Maximum Pin Soldering Temperature (10 seconds maximum) |
260 |
°C |
|
Ambient Temperature Range: |
Operating |
-40 to +85 |
°C |
| Storage |
-40 to +100 |
DescriptionThe PVT422P Series Photovoltaic Relay is a dual-pole, normally open solid-state relay that can replace electromechanical relays in many applications. It utilizes International Rectifier's HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator.
PVT422P is ideally suited for PCMCIA card applications. Its extremely low profile allows it to be used in Type II cards whose outer shells are only 5mm thick. Series PVT422P Relays are packaged in an 8-pin, molded 'Thin-Pak' DIP package with 'gull-wing' surface mount terminals. It is available in plastic shipping tubes or on tape-and-reel. Please refer to Part Identification (opposite) for details.
Parameters: | Technical/Catalog Information | PVT422P |
| Vendor | International Rectifier |
| Category | Relays |
| Mounting Type | Surface Mount |
| Termination Style | Gull Wing |
| Package / Case | 8-Thin-Pak |
| Circuit | DPST (2 Form A) |
| Load Current | 120mA |
| Voltage - Input | 1.2VDC |
| Voltage - Load | 0 ~ 400 V |
| Output Type | AC, DC |
| On-State Resistance | 35 Ohm |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | PVT422P
PVT422P
|
PVT422P Data Sheet
