8-bit Microcontrollers (MCU) 7KB FL 352R 25 I/O
PIC16F913-I/SO: 8-bit Microcontrollers (MCU) 7KB FL 352R 25 I/O
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
SpecificationsDescriptionThe PIC1018SCL is one member of the PIC1018 family which is designed as o...
Core : | PIC16 | Processor Series : | PIC16 | ||
Data Bus Width : | 8 bit | Maximum Clock Frequency : | 20 MHz | ||
Program Memory Size : | 7 KB | Data RAM Size : | 256 B | ||
On-Chip ADC : | Yes | Operating Supply Voltage : | 4.5 V to 5.5 V | ||
Package / Case : | SOIC-28 Wide | Mounting Style : | SMD/SMT |
The PIC16F913-I/SO is designed as 28-pin flash-based, 8-bit CMOS microcontrollers with LCD driver and nanowatt technology.
PIC16F913-I/SO has many features and some are listed here. (1) Only 35 instructions to learn: all single-cycle instructions except branches. (2) Operating speed: DC - 20MHz oscillator/clock input and DC - 200 ns instruction cycle. (3) Program memory read (PMR) capability. (4) Interrupt capability. (5) 8-level deep hardware stack. (6) Direct, indirect and relative addressing modes. (7) Software selectable 31 kHz internal oscillator. (8) Power-saving sleep mode. (9) Wide operating voltage range (2.0V to 5.5V). (10) Industrial and extended temperature range. (11) Power-on reset (POR). That are all the main features.
Some PIC16F913-I/SO absolute maximum ratings have been concluded into several points as follow. (1) Its ambient temperature under bias would be from -40° to +125°C. (2) Its storage temperature would be from -65°C to +150°C. (3) Its voltage on VDD with respect to VSS would be from -0.3V to +6.5V. (4) Its voltage on MCLR with respect to Vss would be from -0.3V to +13.5V. (5) Its voltage on all other pins with respect to VSS would be from -0.3V to (VDD + 0.3V). (6) Its total power dissipation would be 800 mW. (7) Its maximum current out of VSS pin would be 95mA. (8) Its maximum current into VDD pin would be 95mA. (9) Its input clamp current, IIK (VI < 0 or VI > VDD) would be ±20mA. (10) Its output clamp current, Iok (Vo < 0 or Vo >VDD) would be ±20mA. (11) Its maximum output current sunk by any I/O pin would be 25mA. (12) Its maximum output current sourced by any I/O pin would be 25mA. (13) Its maximum current sourced by all ports (combined) would be 90mA. (14) Its maximum current sunk by all ports (combined) would be 90mA. It should be noted that stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!
Technical/Catalog Information | PIC16F913-I/SO |
Vendor | Microchip Technology |
Category | Integrated Circuits (ICs) |
Program Memory Size | 4K x 14 |
RAM Size | 256 x 8 |
Number of I /O | 24 |
Package / Case | 28-SOIC (7.5mm Width) |
Speed | 20MHz |
Controller Series | PIC16F |
Oscillator Type | Internal |
Packaging | Tube |
Program Memory Type | FLASH |
EEPROM Size | 256 x 8 |
Core Processor | PIC |
Data Converters | A/D 5x10b |
Core Size | 8-Bit |
Operating Temperature | -40°C ~ 85°C |
Connectivity | I²C, SPI, UART/USART |
Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
Voltage - Supply (Vcc/Vdd) | 2 V ~ 5.5 V |
Drawing Number | * |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | PIC16F913 I SO PIC16F913ISO |