PIC10F200

Features:

• 4 MHz precision internal oscillator:
- Factory calibrated to ±1%
• In-Circuit Serial Programming™ (ICSP™)
• In-Circuit Debugging (ICD) support
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip RC oscillator for reliable operation
• Programmable code protection
• Multiplexed MCLR input pin
• Internal weak pull-ups on I/O pins
• Power-saving Sleep mode
• Wake-up from Sleep on pin change




Application

The PIC10F200/202/204/206 devices fit in applications ranging from personal care appliances and security systems to low-power remote transmitters/receivers. The Flash technology makes customizing application programs (transmitter codes, appliance settings, receiver frequencies, etc.) extremely fast and convenient. The small footprint packages, for through hole or surface mounting, make these microcontrollers well suited for applications with space limitations. Low cost, low power, high performance, ease of use and I/O flexibility make the PIC10F200/202/204/206 devices very versatile even in areas where no microcontroller use has been considered before (e.g., timer functions, logic and PLDs in larger systems and coprocessor applications).

Pinout






Specifications

Ambient temperature under bias.............................. -40°C to +125°C
Storage temperature ............................................... -65°C to +150°C
Voltage on V_DD with respect to V_SS ...................................... 0 to +6.5V
Voltage on MCLR with respect to V_SS....................................0 to +13.5V
Voltage on all other pins with respect to V_SS ....... -0.3V to (V_DD + 0.3V)
Total power dissipation(1) ........................................................800 mW
Max. current out of V_SS pin ..........................................................80 mA
Max. current into V_DD pin .............................................................80 mA
Input clamp current, I_IK (V_I < 0 or V_I > V_DD).............................±20 mA
Output clamp current, I_OK (V_O < 0 or V_O > V_DD) ......................±20 mA
Max. output current sunk by any I/O pin ....................................25 mA
Max. output current sourced by any I/O pin ...............................25 mA
Max. output current sourced by I/O port ....................................75 mA
Max. output current sunk by I/O port .........................................75 mA

Parameter Name	Value
Program Memory Type	Flash
Program Memory (KB)	0.375
CPU Speed (MIPS)	1
RAM Bytes	16
Timers	1 x 8-bit
Temperature Range (C)	-40 to 125
Operating Voltage Range (V)	2 to 5.5
Pin Count	6

Description

The PIC10F200/202/204/206 devices from Microchip Technology are low-cost, high-performance, 8-bit, fullystatic, Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33 single-word/ single-cycle instructions. All instructions are single cycle (1 s) except for program branches, which take two cycles. The PIC10F200/202/204/206 devices deliver performance in an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy-to-use and easy to remember instruction set reduces development time significantly.

The PIC10F200/202/204/206 products are equipped with special features that reduce system cost and power requirements. The Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external Reset circuitry. INTRC Internal Oscillator mode is provided, thereby preserving the limited number of I/O available. Power-saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability.

The PIC10F200/202/204/206 devices are available in cost-effective Flash, which is suitable for production in any volume. The customer can take full advantage of Microchip's price leadership in Flash programmable microcontrollers, while benefiting from the Flash programmable flexibility.

The PIC10F200/202/204/206 products are supported by a full-featured macro assembler, a software simulator, an in-circuit debugger, a 'C' compiler, a low-cost development programmer and a full featured programmer. All the tools are supported on IBM® PC and compatible machines.

The PIC10F200 is a low-cost, high-performance, 8-bit, fullystatic, Flash-based CMOS microcontroller. It employs a RISC architecture with only 33 single-word/ single-cycle instructions. All instructions are single cycle (1 s) except for program branches, which take two cycles. PIC10F200/202/204/206 delivers performance in an order of magnitude higher than competitors in the same price category. The easy-to-use and easy to remember instruction set reduces development timesignificantly.