Features: • Only 35 single word instructions to learn• All single cycle instructions except for program branches which are two cycle• Operating speed: DC - 20 MHz clock input DC - 200 ns instruction cycle• Up to 8K x 14 words of FLASH Program Memory, Up to 368 x 8 bytes of ...
PIC16F874: Features: • Only 35 single word instructions to learn• All single cycle instructions except for program branches which are two cycle• Operating speed: DC - 20 MHz clock input DC - ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
SpecificationsDescriptionThe PIC1018SCL is one member of the PIC1018 family which is designed as o...
• Only 35 single word instructions to learn
• All single cycle instructions except for program branches which are two cycle
• Operating speed: DC - 20 MHz clock input DC - 200 ns instruction cycle
• Up to 8K x 14 words of FLASH Program Memory, Up to 368 x 8 bytes of Data Memory (RAM)Up to 256 x 8 bytes of EEPROM data memory
• Pinout compatible to the PIC16C73B/74B/76/77
• Interrupt capability (up to 14 sources)
• Eight level deep hardware stack
• Direct, indirect and relative addressing modes
• Power-on Reset (POR)
• Power-up Timer (PWRT) Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
• Programmable code-protection
• Power saving SLEEP mode
• Selectable oscillator options
• Low-power, high-speed CMOS FLASH/EEPROM technology
• Fully static design
• In-Circuit Serial Programmingä (ICSP) via two pins
• Timer0: 8-bit timer/counter with 8-bit prescaler
• Timer1: 16-bit timer/counter with prescaler, can be incremented during sleep via external crystal/clock
• Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
• Two Capture, Compare, PWM modules
- Capture is 16-bit, max. resolution is 12.5 ns
- Compare is 16-bit, max. resolution is 200 ns
Parameter Name | Value |
Program Memory Type | Flash |
Program Memory (KB) | 7 |
CPU Speed (MIPS) | 5 |
RAM Bytes | 192 |
Data EEPROM (bytes) | 128 |
Digital Communication Peripherals | 1-A/E/USART, 1-MSSP(SPI/I2C) |
Capture/Compare/PWM Peripherals | 2 CCP |
Timers | 2 x 8-bit, 1 x 16-bit |
ADC | 8 ch, 10-bit |
Temperature Range (C) | -40 to 85 |
Operating Voltage Range (V) | 2 to 5.5 |
Pin Count | 40 |
Ambient temperature under bias | -55 to +125°C |
Storage temperature | -65°C to +150°C |
Voltage on any pin with respect to VSS (except VDD, MCLR. and RA4) | -0.3V to (VDD + 0.3V) |
Voltage on VDD with respect to VSS | -0.3 to +7.5V |
Voltage on MCLR with respect to VSS (Note 2) | 0 to +14V |
Voltage on RA4 with respect to Vss | 0 to +8.5V |
Total power dissipation (Note 1 | 1.0W |
Maximum current out of VSS pin | 300 mA |
Maximum current into VDD pin | 250 mA |
Input clamp current, IIK (VI < 0 or VI > VDD) | ± 20 mA |
Output clamp current, IOK (VO < 0 or VO > VDD) | ± 20 mA |
Maximum output current sunk by any I/O pin | 25 mA |
Maximum output current sourced by any I/O pin | 25 mA |
Maximum current sunk by PORTA, PORTB, and PORTE (combined) (Note 3 | 200 mA |
Maximum current sourced by PORTA, PORTB, and PORTE (combined) (Note 3) | 200 mA |
Maximum current sunk by PORTC and PORTD (combined) (Note 3) | 200 mA |
Maximum current sourced by PORTC and PORTD (combined) (Note 3) | 200 mA |