Operating Temperature Range
:
Data Bus Width
: 8 bit
On-Chip ADC
: Yes
Core
: PIC
Maximum Clock Frequency
: 20 MHz
Mounting Style
: SMD/SMT
Data RAM Size
: 256 B
Processor Series
: PIC16
Program Memory Size
: 7 KB
Operating Supply Voltage
: 4.5 V to 5.5 V
Package / Case
: SOIC-20 Wide
DescriptionThe PIC16F690-I/SO is one member of the PIC16F690 series.The Pm25LV010 are 512 Kbit/1 Mbits 3.0 Volt-only serial Flash memories. These devices are designed to use a single low voltage, range from 2.7 Volt to 3.6 Volt, power supply to perform read, erase and program operations.The devices can be programmed in standard EPROM programmers as well.The device is optimized for use in many commercial applications where low-power and low-voltage operation are essential. The Pm25LV010 is enabled through the Chip Enable pin (CE#) and accessed via a 3-wire interface consisting of Serial Data Input (Sl), Serial Data Output (SO), and Serial Clock (SCK). All write cycles are completely self-timed.
Features of the PIC16F690-I/SO are:(1)power-saving sleep mode; (2)wide operating voltage range (2.0V-5.5V); (3)industrial and extended temperature range; (4)power-on reset (POR); (5)power-up timer (PWRTE) and oscillator start-up timer (OST); (6)brown-out reset (BOR) with software control option; (7)enhanced low-current Watchdog Timer (WDT) with on-chip oscillator (software selectable nominal 268 seconds with full prescaler) with software enable; (8)multiplexed master clear/input pin; (9)programmable code protection.The special registers can be classified into two sets:core and peripheral. The Special Function Registers associated with the"core" are described in this section.Registers related to the operation of peripheral features are described in the section of that peripheral feature.
The absolute maximum ratings of the PIC16F690-I/SO can be summarized as:(1)voltage on VDD with respect to VSS:-0.3 to 6.5V;(2)storage temperature range:-65 to 150;(3)voltage on all other pins with respect to VSS:-0.3 V to Vdd+0.3 V;(4)temperature under bias:-40 to 125;(5)all output voltage with respect to ground:-0.5 V to VCC + 0.5 V.A wide variety of demonstration, development and evaluation boards for various PIC MCUs and dsPIC DSCs allows quick application development on fully functional systems. Most boards include prototyping areas for adding custom circuitry and provide application firmware and source code for examination and modification.The boards support a variety of features, including LEDs, temperature sensors, switches, speakers, RS-232 interfaces, LCD displays, potentiometers and additional EEPROM memory.
Parameters: | Technical/Catalog Information | PIC16F690-I/SO |
| Vendor | Microchip Technology |
| Category | Integrated Circuits (ICs) |
| Program Memory Size | 7KB (4K x 14) |
| RAM Size | 256 x 8 |
| Number of I /O | 18 |
| Package / Case | 20-SOIC (7.5mm Width) |
| Speed | 20MHz |
| Controller Series | PIC16F |
| Oscillator Type | Internal |
| Packaging | Tube |
| Program Memory Type | FLASH |
| EEPROM Size | 256 x 8 |
| Core Processor | PIC |
| Data Converters | A/D 12x10b |
| Core Size | 8-Bit |
| Operating Temperature | -40°C ~ 85°C |
| Connectivity | I²C, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Voltage - Supply (Vcc/Vdd) | 2 V ~ 5.5 V |
| Drawing Number | * |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | PIC16F690 I SO
PIC16F690ISO
|
PIC16F690-I/SO Data Sheet
