8-bit Microcontrollers (MCU) 1.75KB 64 RAM 12 I/O Ind Temp PDIP14
PIC16F630-I/P: 8-bit Microcontrollers (MCU) 1.75KB 64 RAM 12 I/O Ind Temp PDIP14
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
SpecificationsDescriptionThe PIC1018SCL is one member of the PIC1018 family which is designed as o...
Core : | PIC16 | Processor Series : | PIC16 | ||
Data Bus Width : | 8 bit | Maximum Clock Frequency : | 20 MHz | ||
Program Memory Size : | 1.75 KB | Data RAM Size : | 64 B | ||
On-Chip ADC : | No | Operating Supply Voltage : | 2 V to 5.5 V | ||
Package / Case : | PDIP-14 | Mounting Style : | Through Hole |
The PIC16F630-I/P is one member of the PIC16F630 series.It has the following features including (1)12 I/O pins with individual direction control;(2)High current sink/source for direct LED dr;(3)Industrial and Extended temperature range;(4)Watchdog Timer (WDT) with independent oscillator for reliable operation;(5)Individual programmable weak pull-ups;(6)Programmable code protection.
This document contains device specific information for the PIC16F630-I/P. Additional information may be found in the PIC® Mid-Range Reference Manual(DS33023), which may be obtained from your local Microchip Sales Representative or downloaded from the Microchip web site. The Reference Manual should be considered a complementary document to this Data Sheet and is highly recommended reading for a better understanding of the device PIC16F630-I/P architecture and operation of the peripheral modules.The Special Function registers are registers used bythe CPU and peripheral functions for controlling the desired operation of the device . These registers are static RAM.The special registers can be classified into two sets:core and peripheral. The Special Function registers associated with the "core" are described in this section. Those related to the operation of the peripheral features are described in the section of that peripheral feature.
The PIC16F630-I/P family has an 8-level x 13-bit wide hardware stack (see Figure 2-1). The stack space is not part of either program or data space and the stack pointer is not readable or writable. The PC is PUSHed onto the stack when a CALL instruction is executed or an interrupt causes a branch. The stack is POPed in the event of a RETURN, RETLW or a RETFIE instruction execution. PCLATH is not affected by a PUSH or POP operation.Each of the PORTA pins is individually configurable as an interrupt-on-change pin. Control bits IOCAx enable or disable the interrupt function for each pin. Refer to Register 3-4. The interrupt-on-change is disabled on a Power-on Reset.For enabled interrupt-on-change pins, the values are compared with the old value latched on the last read of PORTA. The 'mismatch' outputs of the last read are OR'd together to set, the PORTA Change Interrupt flag bit (RAIF) in the INTCON register.
Technical/Catalog Information | PIC16F630-I/P |
Vendor | Microchip Technology |
Category | Integrated Circuits (ICs) |
Program Memory Size | 1.75KB (1K x 14) |
RAM Size | 64 x 8 |
Number of I /O | 12 |
Package / Case | 14-DIP (300 mil) |
Speed | 20MHz |
Controller Series | PIC16F |
Oscillator Type | Internal |
Packaging | Tube |
Program Memory Type | FLASH |
EEPROM Size | 128 x 8 |
Core Processor | PIC |
Data Converters | - |
Core Size | 8-Bit |
Operating Temperature | -40°C ~ 85°C |
Connectivity | - |
Peripherals | Brown-out Detect/Reset, POR, WDT |
Voltage - Supply (Vcc/Vdd) | 2 V ~ 5.5 V |
Drawing Number | * |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | PIC16F630 I P PIC16F630IP |