PIC16CE624

Specifications

Parameter Name	Value
Program Memory Type	OTP
Program Memory (KB)	1.75
CPU Speed (MIPS)	7.5
RAM Bytes	96
Data EEPROM (bytes)	128
Timers	1 x 8-bit
Comparators	2
Temperature Range (C)	-40 to 85
Operating Voltage Range (V)	2.5 to 5.5
Pin Count	18

Description

This powerful (133 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS OTP-based 8-bit microcontroller packs Microchip's powerful PIC? architecture into an 18-pin package and is upwards compatible with the PIC16C5X and PIC12CXXX devices. The PIC16C624 features 2 Comparators, a programmable voltage reference and 128 bytes of EEPROM data memory for storing non-volatile information that make PIC16CE624 ideal for entry level applications in automotive, industrial, appliances and consumer applications.

The features of PIC16CE624 are as follows: (1)13 I/O pins with individual direction control; (2)high current sink/source for direct LED drive; (3)analog comparator module with: Two analog comparators, Programmable on-chip voltage reference (VREF) module; (4)programmable input multiplexing from device inputs and internal voltage reference; (5)comparator outputs can be output signals; (6)timer0: 8-bit timer/counter with 8-bit programmable prescaler.

The absolute maximum ratings of the PIC16CE624 are: (1)ambient temperature under bias: 40°C to +125°C; (2)storage temperature: 65°C to +150°C; (3)voltage on any pin with respect to VSS (except VDD and MCLR): 0.3V to VDD + 0.3V; (4)voltage on VDD with respect to VSS: 0 to +7.5V; (5)voltage on MCLR with respect to VSS: 0 to +14V; (6)total power dissipation: 1.0W; (7)maximum current out of VSS pin: 300 mA; (8)maximum current into VDD pin: 50 mA; (9)input clamp current, IIK (VI<0 or VI> VDD): ±20 mA; (10)output clamp current, IOK (Vo <0 or Vo>VDD): ±20 mA; (11)maximum output current sunk by any I/O pin: 25 mA; (12)maximum output current sourced by any I/O pin: 25 mA; (13)maximum current sunk by PORTA, PORTB, and PORTE: 200 mA; (14)maximum current sourced by PORTA, PORTB, and PORTE: 200 mA.

The following is about the electrical characteristics of PIC16CE624: (1)supply voltage: 3.0V min and 5.5V max at XT, RC and LP osc configuration; (2)RAM data retention voltage: 1.5V typical at device in SLEEP mode; (3)VDD start voltage to ensure internal power-on reset signal: VSS V typical at see section on power-on reset for details; (4)VDD rise rate to ensure internal power-on reset signal: 0.05V/ms min at see section on power-on reset for details; (5)Brown-out Reset Voltage: 3.7V min, 4.3V max and 4.0V typical at BOREN configuration bit is cleared; (6)supply current: 1.8mA typical and 3.3mA max at XT, RC osc configuration, FOSC = 4 MHz, VDD = 5.5V, 5.5V, WDT disabled; (7)power-down current: 1.0A typical and 2.5A max at VDD = 4.0V, WDT enabled. There is not much information about the product, if you want to get more information, please pay attention to our website and we will update it in time.