PIC12C672

The features of PIC12C672 are as follows: (1)8-bit real time clock/counter (TMR0) with 8-bit programmable prescaler; (2)power-on reset (POR); (3)power-up timer (PWRT) and oscillator start-up; (4)timer (OSC); (5)watchdog timer (WDT) with its own on-chip RC oscillator for reliable operation; (6)programmable code-protection; (7)power saving SLEEP mode; (8)interrupt on pin change (GP0, GP1, GP3); (9)internal pull-ups on I/O pins (GP0, GP1, GP3); (10)selectable oscillator options: INTRC: precision internal 4 MHz oscillator, EXTRC: external low-cost RC oscillator, XT: standard crystal/resonator, HS: high speed crystal/resonator, LP: power saving, low frequency crystal; (11)internal pull-up on MCLR pin.

The absolute maximum ratings of the PIC12C672 are: (1)ambient temperature under bias: 40°C to +125°C; (2)storage temperature: 65°C to +150°C; (3)voltage on any pin with respect to VSS (except VDD and MCLR): 0.3V to VDD + 0.3V; (4)voltage on VDD with respect to VSS: 0 to +7.5V; (5)voltage on MCLR with respect to VSS: 0 to +14V; (6)total power dissipation: 1.0W; (7)maximum current out of VSS pin: 300 mA; (8)maximum current into VDD pin: 50 mA; (9)input clamp current, IIK (VI<0 or VI> VDD): ±20 mA; (10)output clamp current, IOK (Vo <0 or Vo>VDD): ±20 mA; (11)maximum output current sunk by any I/O pin: 25 mA; (12)maximum output current sourced by any I/O pin: 25 mA; (13)maximum current sunk by PORTA, PORTB, and PORTE (combined): 100 mA; (14)maximum current sourced by PORTA, PORTB, and PORTE (combined): 100 mA; (15)maximum current sunk by PORTC and PORTD (combined): 100 mA; (16)maximum current sourced by PORTC and PORTD (combined): 100 mA.

The following is about the electrical characteristics of PIC12C672: (1)supply voltage: 3.0V min and 5.5V max at XT, RC and LP osc configuration; (2)RAM data retention voltage: 1.5V typical at device in SLEEP mode; (3)VDD start voltage to ensure internal power-on reset signal: VSS V typical at see section on power-on reset for details; (4)VDD rise rate to ensure internal power-on reset signal: 0.05V/ms min at see section on power-on reset for details; (5)supply current: 2.7mA typical and 5mA max at XT, RC osc configuration, FOSC = 4 MHz, VDD = 5.5V; (7)power-down current: 5.5A typical at VDD = 4.0V, WDT enabled, 40°C to +85°C. There is not much information about the PIC12C672, if you want to get more information, please pay attention to our website and we will update it in time.