Features: • Signaling Rates >400Mbps (200 MHz)
• Single 3.3V Power Supply Design
• Accepts ±350mV (typical) Differential Swing
• Maximum Differential Skew of 0.35ns
• Maximum Propagation Delay of 3.3ns
• Low Voltage TTL (LVTTL) Outputs
• Industrial Temperature Operating Range: -40°C to 85°C
• SOIC, TSSOP, and MSOP Packaging
• Open, Short, and Terminated Fail Safe
• Meets or Exceeds IEEE 1596.3 SCI Standard
• Meets or Exceeds ANSI/TIA/EIA-644 LVDS StandardApplicationApplications include point-to-point and multidrop baseband data transmission over controlled impedance media of approximately 100 Ohms. The transmission media can be printed circuit board traces, backplanes, or cables.
The PI90LV032A, PI90LV028A, PI90LV018A and companion line drivers (PI90LV031A, PI90LV027A, and PI90LV017A) provide new alternatives to RS-232, PECL, and ECL devices for high-speed, point-to-point interface applications.
Pinout
SpecificationsSupply Voltage (VCC) ...................................... 0.3V to +4.0V
Input Voltage (RIN+, RIN- ) ............................. 0.3V to +3.9V
Enable Input Voltage (EN, EN*) ............ 0.3V to (VCC +0.3V)
Output Voltage (ROUT) .......................... 0.3V to (VCC +0.3V)
S Package ................................................................... 750mW
Derate S Package ............................. 8.2mW/°C above +25°C
Storage Temperature Range ........................ -65°C to +150°C
Lead Temperature Range Soldering (4s) ................... .+260°C
Maximum Junction Temperature ................................. +150°C
ESD Rating .................................................................... ..6kVDescriptionThe PI90LV032A, PI90LV028A, and PI90LV018A are differential line receivers that use low-voltage differential signaling (LVDS) to support data rates in excess of 400 Mbps. PI90LV032A, PI90LV028A, and PI90LV018A are designed for applications requiring high-speed, low-power consumption and low noise generation.
A differential input signal (350mV) is translated by the PI90LV032A, PI90LV028A, and PI90LV018A to 3V CMOS output level. Exclusive to the PI90LV032A quad receiver is a power-down mode that Three-states the outputs and places the device in a lowpower idle state (40mW typical).
PI90LV032A Data Sheet
